Datasheet4U Logo Datasheet4U.com

EL5177 - 550MHz Differential Twisted-Pair Driver

General Description

PIN NUMBER 1 2 3 4 5 6 7 8 9 10 PIN NAME FBP IN+ REF INFBN OUTEN VS+ VSOUT+ PIN DESCRIPTION Non-inverting feedback input; resistor RF1 must be connected from this pin to VOUT Non-inverting input Output common-mode control; the common-mode voltage of VOUT will follow the voltage on this pin Inver

Key Features

  • Fully differential inputs, outputs, and feedback.
  • Differential input range ±2.3V.
  • 550MHz 3dB bandwidth.
  • 1100V/µs slew rate.
  • Low distortion at 20MHz.
  • Single 5V or dual ±5V supplies.
  • 40mA maximum output current.
  • Low power, 12.5mA typical supply current.
  • Pb-free (RoHS compliant).

📥 Download Datasheet

Datasheet Details

Part number EL5177
Manufacturer Renesas
File Size 703.52 KB
Description 550MHz Differential Twisted-Pair Driver
Datasheet download datasheet EL5177 Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EL5177 550MHz Differential Twisted-Pair Driver The EL5177 is a high bandwidth amplifier with an output in differential form. It is primarily targeted for applications such as driving twisted-pair lines or any application where common mode injection is likely to occur. The input signal can be in either single-ended or differential form but the output is always in differential form. On the EL5177, two feedback inputs provide the user with the ability to set the device gain (stable at a minimum gain of 1). The output common mode level is set by the reference pin (REF), which has a -3dB bandwidth of 110MHz. Generally, this pin is grounded but it can be tied to any voltage reference. Both outputs (OUT+, OUT-) are short circuit protected to withstand temporary overload condition.