EL7457
EL7457 is 40MHz Non-Inverting Quad CMOS Driver manufactured by Renesas.
features
2A peak drive capability and a nominal on-resistance of just 3. The EL7457 is ideal for driving highly capacitive loads, such as storage and vertical clocks in CCD applications. It is also well suited to ATE pin driving, level-shifting, and clock-driving applications.
The EL7457 is capable of running from single or dual power supplies while using ground referenced inputs. Each output can be switched to either the high (VH) or low (VL) supply pins, depending on the related input pin. The inputs are patible with both 3V and 5V CMOS and TTL logic. The output enable (OE) pin can be used to put the outputs into a high-impedance state. This is especially useful in CCD applications, where the driver should be disabled during power down.
The EL7457 also features very fast rise and fall times which are matched to within 1ns. The propagation delay is also matched between rising and falling edges to within 2ns.
The EL7457 is available in 16-pin QSOP, 16-pin SO (0.150"), and 16-pin QFN packages. All are specified for operation over the full -40°C to +85°C temperature range.
Pinouts
EL7457 [16-PIN SO (0.150”),
QSOP (0.150”)] TOP VIEW
EL7457 [16-PIN QFN (4X4MM)]
TOP VIEW
16 OE 15 INA 14 VS+ 13 OUTA
1 INA 2 OE 3 INB 4 VL 5 GND 6 NC 7 INC 8 IND
VS+ 16 OUTA 15 OUTB 14
NC 13 VH 12 OUTC 11 OUTD 10 VS- 9
INB 1 VL 2 VL 3 GND 4
THERMAL PAD-
12 OUTB 11 VH 10 VH 9 OUTC
INC 5 IND 6 VS- 7 OUTD 8
- THERMAL PAD CONNECTED TO PIN 7 (VS-)
Features
- Clocking speeds up to 40MHz
- 4 channels
- 12ns t R/t F at 1000p F CLOAD
- 1ns rise and fall time match
- 1.5ns prop delay match
- Low quiescent current
- <1m A
- Fast output enable function
- 12ns
- Wide output voltage range
- 8V VL -5V
- -2V VH 16.5V
- 2A peak drive
- 3 on resistance
- Input level shifters
- TTL/CMOS input-patible
- Pb-free (Ro HS pliant)
Applications
- CCD drivers
- Digital...
