Datasheet4U Logo Datasheet4U.com

F6123 - Dual-beam Rx Active Beamforming RFIC

Description

The F6123 is a 16-channel dual-beam receive active beamforming RFIC designed for application in Ku/CDL-Band planar phased array antennas.

The IC has eight RF input ports, two RF output ports, and 16 (8 per beam) phase/amplitude control channels.

Features

  • such as a low-power standby mode, independent enable controls on every channel, and a single-beam mode activated via a dedicated control pin. The device SPI bus and control pins operate from standard 1.8V logic at speeds up to 50MHz. Advanced digital modes and large on-chip memory allow for < 100ns beam position switching times at the array level, greatly reducing dead time and latency. Finally, the compact and CTE-matched FCBGA organic package with all single-ended 50ohm matched RF ports and 0.

📥 Download Datasheet

📁 Similar Datasheet

  • F61200046 - TYPE F6 6x3.5 GLASS SEALED CRYSTAL (Pericom Semiconductor)
  • F6101 - Ku-Band SATCOM Receiver (IDT)
  • F6102 - Ka-Band SATCOM Receiver (IDT)
  • F6103 - Common Data Link (CDL) RX (IDT)
  • F61600023 - TYPE F6 6x3.5 GLASS SEALED CRYSTAL (Pericom Semiconductor)
Other Datasheets by Renesas
  • F6102 - Ka-Band SATCOM Receiver

Full PDF Text Transcription

Click to expand full text
Dual-beam Rx Active Beamforming IC F6123 14.4 – 17.3 GHz Short-Form Datasheet Description The F6123 is a 16-channel dual-beam receive active beamforming RFIC designed for application in Ku/CDL-Band planar phased array antennas. The IC has eight RF input ports, two RF output ports, and 16 (8 per beam) phase/amplitude control channels. The eight input ports of the IC can be driven by eight single-polarized elements or four dual-polarized elements of an electronically scanned array (ESA). Each channel has 6 bits of digital phase and gain control resolution spanning 360° and 26dB of dynamic range, enabling precise beam pattern and polarization control. The IC operates from a single supply of 2.1 - 2.5V.
Published: |