Datasheet4U Logo Datasheet4U.com

HD74LVCZ240A - Octal Buffers / Line Drivers

Description

The HD74LVCZ240A has eight inverter drivers with three state outputs in a 20 pin package.

This device is an inverting buffer and has two active low enables (1G and 2G).

Each enable independently controls four buffers.

Features

  • VCC = 2.7 to 5.5 V.
  • All inputs VIH (Max) = 5.5 V (@VCC = 0 to 5.5 V).
  • All outputs VO (Max) = 5.5 V (@VCC = 0 V or output off state).
  • Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C).
  • Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C).
  • High impedance state during power up and power down.
  • Po.

📥 Download Datasheet

Datasheet preview – HD74LVCZ240A

Datasheet Details

Part number HD74LVCZ240A
Manufacturer Renesas
File Size 94.98 KB
Description Octal Buffers / Line Drivers
Datasheet download datasheet HD74LVCZ240A Datasheet
Additional preview pages of the HD74LVCZ240A datasheet.

📁 Similar Datasheet

  • HD74LVCZ240A - Octal Buffers / Line Drivers with 3-state Outputs (Hitachi Semiconductor)
  • HD74LVCZ244A - Octal Buffers / Line Drivers with 3-state Outputs (Hitachi Semiconductor)
  • HD74LVCZ245A - Octal Bidirectional Transceivers with 3-state Outputs (Hitachi Semiconductor)
  • HD74LVCZ16240A - 16-bit Buffers / Line Drivers with 3-state Outputs (Hitachi Semiconductor)
  • HD74LVCZ16244A - 16-bit Buffers / Line Drivers with 3-state Outputs (Hitachi Semiconductor)
  • HD74LVCZ16245A - 16-bit Bidirectional Transceivers with 3-state Outputs (Hitachi Semiconductor)
  • HD74LVC00 - Quad. 2-input NAND Gates (Hitachi Semiconductor)
  • HD74LVC02 - Quad. 2-input NOR Gates (Hitachi Semiconductor)
  • HD74LVC04 - Hex Inverters (Hitachi Semiconductor)
  • HD74LVC08 - Quad. 2-input AND Gates (Hitachi Semiconductor)
Other Datasheets by Renesas

Full PDF Text Transcription

Click to expand full text
HD74LVCZ240A Octal Buffers / Line Drivers with 3–state Outputs REJ03D0370–0300Z (Previous ADE-205-229A (Z)) Rev.3.00 Jul. 30, 2004 Description The HD74LVCZ240A has eight inverter drivers with three state outputs in a 20 pin package. This device is an inverting buffer and has two active low enables (1G and 2G). Each enable independently controls four buffers. When VCC is between 0 and 1.5 V, the device is in the high impedance state during power up or power down. Low voltage and high-speed operation is suitable at battery drive product (note type personal computer) and low power consumption extends the life of a battery for long time operation. Features • VCC = 2.7 to 5.5 V • All inputs VIH (Max) = 5.5 V (@VCC = 0 to 5.5 V) • All outputs VO (Max) = 5.
Published: |