HIP4080 - High FrequencyFull Bridge FET Driver

Renesas

Datasheet Details

Part number	HIP4080
Manufacturer	Renesas ↗
File Size	1.05 MB
Description	High FrequencyFull Bridge FET Driver
Datasheet	HIP4080-Renesas.pdf

Drives N-Channel FET Full Bridge Including High Side Chop Capability.
Bootstrap Supply Max Voltage to 95VDC.
Drives 1000pF Load at 1MHz in Free Air at 50oC with Rise and Fall Times of 10ns (Typ).
User-Programmable Dead Time.
Charge-Pump and Bootstrap Maintain Upper Bias Supplies.
DIS (Disable) Pin Pulls Gates Low.
Input Logic Thresholds Compatible with 5V to 15V Logic Levels.
Very Low Power Consumption.

📁 HIP4080 Similar Datasheet

HIP4081 - 80V/2.5A Peak/ High Frequency Full Bridge FET Driver (Intersil Corporation)
HIP4011 - Three Phase Brushless DC Motor Controller (Intersil Corporation)
HIP0063 - Hex Low Side MOSFET Driver with Serial or Parallel Interface and Diagnostic Fault Control (Intersil Corporation)
HIP1030 - 1A High Side Driver with Overload Protection (Intersil Corporation)
HIP1031 - Half Amp High Side Driver with Overload Protection (Intersil Corporation)
HIP1090 - Protected High Side Power Switch with Transient Suppression (Intersil Corporation)
HIP2106 - 100V/1A Peak/ Low Cost/ High Frequency Half Bridge Driver (Intersil Corporation)
HIP2500 - Half Bridge 500VDC Driver (Harris Corporation)

Other Datasheets by Renesas

Published: May 30, 2020 |