Datasheet4U Logo Datasheet4U.com

HIP4082 - 1.25A Peak Current H-Bridge FET Driver

Features

  • and specifications is optimized for.

📥 Download Datasheet

Datasheet preview – HIP4082

Datasheet Details

Part number HIP4082
Manufacturer Renesas Electronics
File Size 690.11 KB
Description 1.25A Peak Current H-Bridge FET Driver
Datasheet download datasheet HIP4082 Datasheet
Additional preview pages of the HIP4082 datasheet.

📁 Similar Datasheet

  • HIP4081 - 80V/2.5A Peak/ High Frequency Full Bridge FET Driver (Intersil Corporation)
  • HIP4011 - Three Phase Brushless DC Motor Controller (Intersil Corporation)
  • HIP0063 - Hex Low Side MOSFET Driver with Serial or Parallel Interface and Diagnostic Fault Control (Intersil Corporation)
  • HIP1030 - 1A High Side Driver with Overload Protection (Intersil Corporation)
  • HIP1031 - Half Amp High Side Driver with Overload Protection (Intersil Corporation)
  • HIP1090 - Protected High Side Power Switch with Transient Suppression (Intersil Corporation)
  • HIP2106 - 100V/1A Peak/ Low Cost/ High Frequency Half Bridge Driver (Intersil Corporation)
  • HIP2500 - Half Bridge 500VDC Driver (Harris Corporation)
  • HIP5010 - 7V/ 17A SynchroFET Complementary Drive Synchronous Half-Bridge (Intersil Corporation)
  • HIP5011 - 7V/ 17A SynchroFET Complementary Drive Synchronous Half-Bridge (Intersil Corporation)
Other Datasheets by Renesas
  • HIP4082IB - 1.25A Peak Current H-Bridge FET Driver
  • HIP4082IP - 1.25A Peak Current H-Bridge FET Driver
  • HIP4082IPZ - 1.25A Peak Current H-Bridge FET Driver
  • HIP4080 - High FrequencyFull Bridge FET Driver
  • HIP4080A - High Frequency Full Bridge FET Driver
  • HIP4081A - High Frequency Full Bridge FET Driver
  • HIP4083 - Three Phase High Side Driver
  • HIP4086 - 3-Phase MOSFET Driver

Full PDF Text Transcription

Click to expand full text
HIP4082 80V, 1.25A Peak Current H-Bridge FET Driver The HIP4082 is a medium frequency, medium voltage H-Bridge N-Channel MOSFET driver IC, available in 16 lead plastic SOIC (N) and DIP packages. Specifically targeted for PWM motor control and UPS applications, bridge based designs are made simple and flexible with the HIP4082 H-bridge driver. With operation up to 80V, the device is best suited to applications of moderate power levels. Similar to the HIP4081, it has a flexible input protocol for driving every possible switch combination except those which would cause a shoot-through condition. The HIP4082’s reduced drive current allows smaller packaging and it has a much wider range of programmable dead times (0.1 to 4.5s) making it ideal for switching frequencies up to 200kHz.
Published: |