Overview: DATASHEET HIP4080A
80V/2.5A Peak, High Frequency Full Bridge FET Driver FN3658 Rev.8.00 Dec 11, 2019 The HIP4080A is a high frequency, medium voltage Full Bridge N-Channel FET driver IC, available in 20 lead plastic SOIC and DIP packages. The HIP4080A includes an input parator, used to facilitate the “hysteresis” and PWM modes of operation. Its HEN (high enable) lead can force current to freewheel in the bottom two external power MOSFETs, maintaining the upper power MOSFETs off. Since it can switch at frequencies up to 1MHz, the HIP4080A is well suited for driving Voice Coil Motors, switching power amplifiers and power supplies.
HIP4080A can also drive medium voltage brush motors, and two HIP4080As can be used to drive high performance stepper motors, since the short minimum “on-time” can provide fine micro-stepping capability.
Short propagation delays of approximately 55ns maximize control loop crossover frequencies and dead-times which can be adjusted to near zero to minimize distortion, resulting in precise control of the driven load.
The similar HIP4081A IC allows independent control of all 4 FETs in a Full Bridge configuration.
The Application Note for the HIP4080A is AN9404. Ordering Information PART NUMBER TEMPERATURE PACKAGE PKG. RANGE (°C) (RoHS pliant) DWG. # HIP4080AIPZ (Note 1) -40 to +85 20 Ld PDIP E20.3 HIP4080AIBZ (Note 1) -40 to +85 20 Ld SOIC M20.3 NOTES:
1. Intersil Pb-Free products employ special Pb-free material sets; molding pounds/die attach materials and 100% matte tin plate termination finish, which is patible with both SnPb and Pb-free soldering operations. Intersil Pb-Free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pbfree requirements of IPC/JEDEC J Std-020B.
2. Add “T” suffix for Tape and Reel packing option. HIP4080AIP not available in Tape and Reel.
