Overview: DATASHEET HIP4081A
80V/2.5A Peak, High Frequency Full Bridge FET Driver FN3659 Rev.9.00 Feb12, 2020 The HIP4081A is a high frequency, medium voltage Full Bridge N-Channel FET driver IC, available in 20 lead plastic SOIC and DIP packages. The HIP4081A can drive every possible switch bination except those which would cause a shoot-through condition. The HIP4081A can switch at frequencies up to 1MHz and is well suited to driving Voice Coil Motors, high-frequency switching power amplifiers, and power supplies.
For example, the HIP4081A can drive medium voltage brush motors, and two HIP4081As can be used to drive high performance stepper motors, since the short minimum “on-time” can provide fine micro-stepping capability.
Short propagation delays of approximately 55ns maximizes control loop crossover frequencies and dead-times which can be adjusted to near zero to minimize distortion, resulting in rapid, precise control of the driven load.
A similar part, the HIP4080A, includes an on-chip input parator to create a PWM signal from an external triangle wave and to facilitate “hysteresis mode” switching.
The Application Note for the HIP4081A is the AN9405.
Ordering Information PART NUMBER TEMP RANGE PACKAGE PKG. (°C) (RoHS pliant) DWG. # HIP4081AIPZ (Note) -40 to 85 20 Ld PDIP E20.3 HIP4081AIBZ (Note) -40 to 85 20 Ld SOIC (W) M20.3 HIP4081AIBZT (Note) -40 to 85 20 Ld SOIC (W) M20.3 NOTE: Pb-free products employ special Pb-free material sets; molding pounds/die attach materials and 100% matte tin plate termination finish, which is patible with both SnPb and Pb-free soldering operations. Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J Std-020B.
