900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Renesas Electronics Components Datasheet

ISL29011 Datasheet

Digital Ambient Light Sensor and Proximity Sensor

No Preview Available !

DATASHEET
ISL29011
Digital Ambient Light Sensor and Proximity Sensor with Interrupt Function
FN6467
Rev 6.00
May 1, 2014
The ISL29011 is an integrated ambient and infrared
light-to-digital converter with a built-in IR LED driver and I2C
Interface (SMBus Compatible). This device provides not only
ambient light sensing to allow robust backlight/display brightness
control but also infrared sensing to allow proximity estimation
featured with interrupt function.
For ambient light sensing, an internal ADC has been designed
based on the charge-balancing A/D conversion technique. The
ADC conversion time is nominally 90ms and is user adjustable
from 11µs to 90ms, depending on oscillator frequency and ADC
resolution. This ADC is capable of rejecting 50Hz and 60Hz flicker
noise caused by artificial light sources. The lux-range-select
feature allows users to program the lux range for optimized
counts/lux.
For proximity sensing, the ADC is used to digitize the output signal
from the photodiode array when the internal IR LED driver is
turned on and off for the programmed time periods under
user-selected modulation frequency to drive the external IR LED.
As this proximity sensor employs a noise cancellation scheme to
highly reject unwanted IR noise, the digital output of proximity
sensing decreases with distance. The driver output current is user
selectable up to 100mA to drive different types of IR emitter
LEDs.
Six different modes of operation can be selected via the I2C
interface: Programmable ALS once with auto power-down,
programmable IR sensing once, programmable proximity sensing
once, programmable continuous ALS sensing, programmable
continuous IR sensing and programmable continuous proximity
sensing. The programmable one-time operation modes greatly
reduce power because an immediate automatic shutdown
reduces overall supply current less than 0.5µA.
The ISL29011 supports both hardware and software interrupts
that remain asserted until the host clears it through the I2C
interface for ambient light sensing and proximity detection.
Designed to operate on supplies from 2.25V to 3.63V, the
ISL29011 is specified for operation over the -40°C to +85°C
ambient temperature range. It is packaged in a clear, Pb-free 8 Ld
ODFN package.
Applications
• Display and keypad dimming adjustment and proximity
sensing for:
- Mobile devices: smart phone, PDA, GPS
- Computing devices: Notebook PC, Webpad
- Consumer devices: LCD-TV, digital picture frame, digital
camera
• Industrial and medical light and proximity sensing
Features
Proximity Sensing
• Ambient IR cancellation during proximity sensing
- Works under direct sunlight
• IR LED driver with programmable source current
- Adjustable current drive from 100mA to 12.5mA
• Programmable LED current modulation frequency
• Variable conversion resolution
Ambient Light Sensing
• Simple output code directly proportional to lux
• Adjustable sensitivity up to 65 counts per lux
• Selectable range (via I2C)
- Range 1 = 0.015 lux to 1,000 lux
- Range 2 = 0.06 lux to 4,000 lux
- Range 3 = 0.24 lux to 16,000 lux
- Range 4 = 0.96 lux to 64,000 lux
• Integrated 50Hz/60Hz noise rejection
• Works under various light sources, including sunlight
Ideal Spectral Response for Light and Proximity Sensor
• Light sensor close to human eye response
- Excellent light sensor IR and UV rejection
• Proximity sensor range from 850nm to 950nm
- Can use either 850nm or 950nm LED solution
Ultra Low Power
• 90µA max operating current
• Software shutdown and automatic shutdown
- 0.5µA max shutdown current
Easy to Use
• I2C (SMBus compatible) output
• No complex algorithms needed
• Temperature compensated
• Small form factor
- 8 Ld 2.0mmx2.1mmx0.7mm ODFN package
Additional Features
• I2C and SMBus compatible
• 1.7V to 3.63V supply for I2C interface
• 2.25V to 3.63V sensor power supply
• Pb-Free (RoHS compliant)
FN6467 Rev 6.00
May 1, 2014
Page 1 of 19


Renesas Electronics Components Datasheet

ISL29011 Datasheet

Digital Ambient Light Sensor and Proximity Sensor

No Preview Available !

ISL29011
Ordering Information
PART NUMBER
(Notes 1, 2, 3)
TEMP. RANGE
(°C)
PACKAGE
Tape and Reel
(Pb-Free)
PKG.
DWG. #
ISL29011IROZ-T7
-40 to +85
8 Ld ODFN
L8.2.1x2.0
ISL29011IROZ-EVALZ
Evaluation Board
NOTES:
1. Please refer to TB347 for details on reel specifications.
2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets; molding compounds/die attach materials and NiPdAu
plate - e4 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
3. For Moisture Sensitivity Level (MSL), please see device information page for ISL29011. For more information on MSL, please see tech brief TB477.
Pin Configuration
ISL29011
(8 LD ODFN)
TOP VIEW)
VDDD 1
8 IRDR
VDDA 2
7 INT
GND 3
6 SDA
REXT 4
5 SCL
EXPOSED PAD CAN BE CONNECTED TO GND OR
ELECTRICALLY ISOLATED
Pin Descriptions
PIN NUMBER
1
2
3
4
5
6
7
8
PIN NAME
DESCRIPTION
VDDD Positive digital supply: 2.25V to 3.63V.
VDDA Positive analog supply: 2.25V to 3.63V, VDDA and VDDD should be externally shorted.
GND Ground. The thermal pad is also connected to the GND pin.
REXT
SCL
SDA
External resistor pin setting the internal reference current and the conversion time. 499kΩ with a 1% tolerance resistor
is recommended.
I2C serial clock line
I2C serial data line
The I2C bus lines can be pulled from 1.7V to above VDD, 3.63V max.
INT Interrupt pin; LO for interrupt/alarming. The INT pin is an open drain.
IRDR
IR LED driver pin connecting to the anode of the external IR LED. The source current of the IR LED driver can be
programmed through I2C.
Exposed pad connected to ground or electrically isolated.
FN6467 Rev 6.00
May 1, 2014
Page 2 of 19


Part Number ISL29011
Description Digital Ambient Light Sensor and Proximity Sensor
Maker Renesas
Total Page 19 Pages
PDF Download

ISL29011 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 ISL29010 Light-to-Digital Output Sensor
Renesas
2 ISL29011 Digital Ambient Light Sensor and Proximity Sensor
Renesas
3 ISL29012 Light-to-Digital Output Sensor
Intersil Corporation
4 ISL29013 Light-to-Digital Output Sensor
Renesas
5 ISL29015 Integrated Digital Ambient Light Sensor and Proximity Sensor
Renesas
6 ISL29018 Digital Ambient Light Sensor and Proximity Sensor
Renesas





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy