900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Renesas Electronics Components Datasheet

ISL6398 Datasheet

Advanced Linear EAPP Digital 6-Phase Green PWM Controller

No Preview Available !

DATASHEET
ISL6398
Advanced Linear EAPP Digital 6-Phase Green PWM Controller for Digital Power
Management with NVM and AUTO Phase Shedding
FN8575
Rev 1.00
Aug 13, 2015
The ISL6398 is a smart and smallest 6-Phase Green PWM
controller, designed for networking, datacenter, and POL
applications. It includes programmable functions and
telemetries for easy use and system flexibility using SMBus,
PMBus, or I2C interface, which is designed to program NVM
banks up to 8 different compensations and system
parameters. This minimizes external components and
significantly reduces design complexity and PCB area, and
simplifies the manufacturing process.
The ISL6398 utilizes Intersil’s proprietary Advanced Linear EAPP
(Enhanced Active Pulse Positioning) Digital control scheme to
achieve the extremely fast linear transient response with fewer
output capacitors and overcomes many hurdles of traditional
digital approach, which uses non-linear, discrete control method
for both voltage loop and current balance loop and runs into beat
frequency oscillation and non-linear response. The ISL6398
accurately monitors the load current via the IMON pin and
reports this information via the READ_IOUT register for power
management. The ISL6398 features auto-phase shedding. In low
power operation, the magnetic core and switching losses are
significantly reduced with lower phase count operation, yielding
high efficiency at light load. When APA is triggered, the dropped
phase(s) are added back to sustain heavy load transient
response and efficiency. It optimizes the efficiency from light to
full load for Greener Environment without sacrificing the transient
performance.
The ISL6398 senses the output current continuously by a
dedicated current sense resistor or the DCR of the output
inductor. The sensed current flows through a digitally
programmable 1% droop resistor for precision load line control.
Current sensing circuits also provide the needed signals for
channel-current balancing, average overcurrent protection and
individual phase current limiting. The TM pin senses an NTC
thermistor’s temperature, which is internally digitized for thermal
monitoring and for integrated thermal compensation of the
current sense elements of the regulator.
The ISL6398 features remote voltage sensing and completely
eliminates any potential difference between remote and local
grounds. This improves regulation and protection accuracy. The
threshold-sensitive enable input is available to accurately
coordinate the start-up of the ISL6398 with other voltage rails.
Features
• SMBus/PMBus/I2C Compatible
- Programmable IMAX, TMAX, BOOT, and address
- Programmable soft-start rate and DVID rate
- Up to 1.5MHz
- NVM to store up to 8 Configurations with programmable
frequency, droop, auto, faults (OCP, UVP, CFP), etc.
- No firmware requirement and hassle
• Advanced Linear EAPP Digital control scheme (patented)
- Digitally programmable compensation
- Auto phase shedding option for greener environment
- Variable frequency control during load transients to
reduce beat frequency oscillation
- Linear control with evenly distributed PWM pulses for
better phase current balance during load transients
- Voltage feed-forward and ramp adjustable options
- High frequency compensation option
- Active phase adding and dropping for enhanced light load
efficiency
• Phase doubler and coupled-inductor compatibility
• Differential remote voltage sensing with ±0.5% accuracy
• Programmable minimum phase count operation
• Programmable slew rate of dynamic VID with dynamic VID
compensation (DVC)
• Support 3-state 5V or 3.3V PWM DrMOS and driver
• Zero current shutdown with ISL6627
• Precision resistor or DCR differential current sensing
- Accurate load-line (Droop) programming and control
- Accurate current monitoring and channel-current
balancing with calibration capability
• True input current sensing for catastrophic failure protection
• Average overcurrent protection and channel current limiting
• High common mode current sense input (VCC-1.5V)
• Open sensing and single point of loop failure protection
• Thermal monitoring and integrated compensation
• 1- to 6-Phase option and up to 2MHz per phase
• Start-up into precharged load
• Pb-free (RoHS Compliant)
• 40 Ld 5x5 Plastic Package
Applications
• High efficiency and high density digital power
• High performance multi-phase POL and network
• Cloud Computing, Router, Data Center and Storage
• General processor power
FN8575 Rev 1.00
Aug 13, 2015
Page 1 of 57


Renesas Electronics Components Datasheet

ISL6398 Datasheet

Advanced Linear EAPP Digital 6-Phase Green PWM Controller

No Preview Available !

ISL6398
Table of Contents
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Driver Recommendation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ISL6398 Internal Block Diagram . . . . . . . . . . . . . . . . . . . . . . . 5
Typical Application: 6-Phase VR with DrMOS and
PMBus/SMBus/I2C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Typical Application: 4-Phase VR with DrMOS and
PMBus/SMBus/I2C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Typical Application: 6-Phase VR for General Processor
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Typical Application: 12-Phase VR for Over-clocking
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . .10
Thermal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Recommended Operating Conditions . . . . . . . . . . . . . . . . .10
Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Functional Pin Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . .14
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Multiphase Power Conversion . . . . . . . . . . . . . . . . . . . . . . . . . 15
Interleaving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PWM Modulation Scheme . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PWM Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
DrMOS and Driver Compatibility . . . . . . . . . . . . . . . . . . . . . . . 17
Phase Doubler Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Precharged Start-up Capability . . . . . . . . . . . . . . . . . . . . . . . . 17
Switching Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Current Sensing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
RSET and L/DCR Matching for Coupled inductor . . . . . . . . . . 19
Channel-current Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Voltage Regulation (5mV and 10mV Mode). . . . . . . . . . . . . . 20
Load-line Regulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Dynamic VID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Operation Initialization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Enable and Disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Soft-start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Current Sense Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Fault Monitoring and Protection . . . . . . . . . . . . . . . . . . . . . 26
VR_Ready Signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Overvoltage Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Undervoltage Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Overcurrent Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Thermal Monitoring (VR_HOT#) . . . . . . . . . . . . . . . . . . . . . . . 27
Temperature Compensation . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Integrated Temperature Compensation . . . . . . . . . . . . . . . . 29
Design Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Dynamic VID Compensation (DVC) . . . . . . . . . . . . . . . . . . . . . . . . .30
Programmable Compensation . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Catastrophic Fault Protection . . . . . . . . . . . . . . . . . . . . . . . . . 30
Input Current Sensing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Auto-phase Shedding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Resistor Reader (Patented) . . . . . . . . . . . . . . . . . . . . . . . . . 32
Memory Banks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SMBus, PMBus and I2C Operation . . . . . . . . . . . . . . . . . . . . 35
General Design Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Power Stages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Current Sensing Resistor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Load-line Regulation Resistor . . . . . . . . . . . . . . . . . . . . . . . . . 51
Output Filter Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Switching Frequency Selection . . . . . . . . . . . . . . . . . . . . . . . . 52
Input Capacitor Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Layout and Design Considerations . . . . . . . . . . . . . . . . . . . . . . 53
Pin Noise Sensitivity, Design and Layout Consideration . . . 53
Component Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Powering Up And Open-Loop Test . . . . . . . . . . . . . . . . . . . . 55
Voltage Regulator (VR) Design Materials . . . . . . . . . . . . . . 55
Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
About Intersil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Package Outline Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
FN8575 Rev 1.00
Aug 13, 2015
Page 2 of 57


Part Number ISL6398
Description Advanced Linear EAPP Digital 6-Phase Green PWM Controller
Maker Renesas
Total Page 30 Pages
PDF Download

ISL6398 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 ISL6398 Advanced Linear EAPP Digital 6-Phase Green PWM Controller
Intersil
2 ISL6398 Advanced Linear EAPP Digital 6-Phase Green PWM Controller
Renesas





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy