Datasheet4U Logo Datasheet4U.com

ISL76671 - Analog Output Ambient Light Sensor

General Description

PIN DESCRIPTION Voltage Supply (1.8V to 3V).

Ground No connect Connected to an external resistor to GND, setting the light-to-voltage scaling constant.

A REXT value of 100kΩis recommended.

Key Features

  • Square root voltage output.
  • 0.01 lux to 100 lux range.
  • 1.8V to 3V supply range.
  • Close to human eye spectral response.
  • Fast response time.
  • Internal temperature compensation.
  • Good IR rejection.
  • Low supply current.
  • Operating temperature range -40°C to +105°C.
  • 6 Ld ODFN: 2mmx2.1mmx0.7mm.
  • Pb-free (RoHS compliant).
  • AEC-Q100 Qualified.

📥 Download Datasheet

Datasheet Details

Part number ISL76671
Manufacturer Renesas
File Size 753.31 KB
Description Analog Output Ambient Light Sensor
Datasheet download datasheet ISL76671 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ISL76627 Precision Low Noise Operational Amplifier Intersil
ISL70001ASEH Rad Hard and SEE Hard 6A Synchronous Buck Regulator Intersil
ISL70001SEH Radiation Hardened and SEE Hardened 6A Synchronous Buck Regulator Intersil
ISL70001SRH Radiation Hardened and SEE Hardened 6A Synchronous Buck Regulator Intersil Corporation
ISL70002SEH Radiation Hardened and SEE Hardened 12A Synchronous Buck Regulator Intersil

Other Datasheets by Renesas

Part Number Description
ISL76682 Automotive Low Power Light-to-Digital Sensor
ISL76683 Light-to-Digital Output Sensor
ISL76120 Automotive Grade USB 2.0 High/Full Speed Multiplexer
ISL76123 SPDT Analog Switch
ISL76161 High Speed D/A Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATASHEET ISL76671 Low Power, <100 Lux Optimized, Analog Output Ambient Light Sensor FN7716 Rev.4.0 May 21, 2021 The ISL76671 is a low cost, light-to-voltage silicon optical sensor combining a photodiode array, a non-linear current amplifier and a micro-power op amp on a single monolithic IC. Similar to the human eye, the photodiode array has peak sensitivity at 550nm and spans the wavelength range 400nm to 600nm, rejecting UV and IR light. The input luminance range is from 0.01 lux to 100 lux. The integrated non-linear current amplifier boosts and converts the photodiode signal into a square root output format, extending dynamic range while maintaining excellent sensitivity in dimly lit conditions.