ISL9211B - Charging System Safety Circuit

Product Overview

Renesas

Datasheet Details

Part number	ISL9211B
Manufacturer	Renesas
File Size	585.89 KB
Description	Charging System Safety Circuit
Datasheet	ISL9211B Datasheet
Additional preview pages of the ISL9211B datasheet.

Product details

Description

SYMBOL VIN GND NC FAULT EN VB ILIM OUT PAD PIN NUMBER DESCRIPTION 1 The input power source.VIN can withstand 24V input.2 System ground reference.3 No connection, and must be left floating.4 FAULT is an open-drain logic output that turns LOW when any protection event occurs.5 IC enable pin.Pull this pin to LO to enable the device and pull it to HI to disable.6 Battery voltage monitoring input.This pin is connected to the battery pack positive terminal via an isolation

Features

24V Max Input Voltage.
Supports Up To 2.0A Input Current.
Fully Integrated Protection Circuit for Three Protected Variables.
High Accuracy Protection Thresholds.
User Programmable Overcurrent Protection Threshold.
Responds to Input Overvoltage in Less Than 1µs.
High Immunity of False Triggering Under Transients.
Fault Indication for Various Fault Occurrence.
Easy to Use.
Pb-Free (RoHS Compliant) Applicatio.

📁 Similar Datasheet

ISL9203 - Li-ion/Li Polymer Battery Charger (Intersil Corporation)
ISL9220B - Switching Charger (Intersil Corporation)
ISL9000AM - Dual LDO (Intersil)
ISL9008 - Low Noise LDO (Intersil)
ISL90840 - XDCP (Intersil)
ISL90843 - Quad Digital Controlled Potentiometers (Intersil Corporation)
ISL94200 - Multi-Cell Li-ion Battery Pack OCP/Analog Front-End (Intersil)
ISL94201 - Multi-Cell Li-ion Battery Pack Analog Front-End (Intersil)

Other Datasheets by Renesas

ISL9211 - Charging System Safety Circuit
ISL9211A - Charging System Safety Circuit
ISL9212 - Charging System Safety Circuit
ISL9212A - Charging System Safety Circuit
ISL9212B - Charging System Safety Circuit
ISL9214 - Li-ion/Li-Polymer Battery Charger Accepting Two Power Sources

Published: Jun 18, 2019 |