Datasheet4U Logo Datasheet4U.com

ISL95710 - Digitally Controlled Potentiometer

Description

DESCRIPTION Controls the direction of wiper movement and whether the counter is incremented or decremented Negative bias voltage for the potentiometer wiper control Ground Chip select.

Features

  • Non-Volatile Solid-State Potentiometer.
  • Up/Down Interface with Chip Select Enable.
  • DCP Terminal Voltage ±2.7V to ±5.5V.
  • 128 Wiper Tap Points - Wiper position stored in nonvolatile memory and recalled on power-up.
  • 127 Resistive Elements - Typical RTOTAL tempco = ±50ppm/°C - End to end resistance range ±20%.
  • Low Power CMOS - Standby current, 1µA - Active current, 3mA max - VCC = 2.7V to 5.5V - V- = -2.7V to -5.5V.
  • High Reliability - E.

📥 Download Datasheet

Datasheet preview – ISL95710

Datasheet Details

Part number ISL95710
Manufacturer Renesas Electronics
File Size 701.85 KB
Description Digitally Controlled Potentiometer
Datasheet download datasheet ISL95710 Datasheet
Additional preview pages of the ISL95710 datasheet.

📁 Similar Datasheet

  • ISL95711 - 128 Taps I2C Serial Interface (Intersil Corporation)
  • ISL9502 - Two-Phase PWM Controller (Intersil)
  • ISL9518 - Narrow VDC Regulator/Charger (Intersil Corporation)
  • ISL9518A - Narrow VDC Regulator/Charger (Intersil Corporation)
  • ISL9519C - Narrow VDC Regulator/Charger (Intersil)
  • ISL95820 - Green Hybrid Digital Four Phase PWM Controller (Intersil)
  • ISL95831 - 3+1 Voltage Regulator (Intersil)
  • ISL95833 - Dual 2+1 PWM Controller (Intersil Corporation)
  • ISL9000AM - Dual LDO (Intersil)
  • ISL9008 - Low Noise LDO (Intersil)
Other Datasheets by Renesas
  • ISL95712 - Multiphase PWM Regulator
  • ISL9506 - Multiphase PWM Controller
  • ISL9519 - Narrow VDC Regulator/Charger
  • ISL95210 - 10A Buck Regulator
  • ISL95310 - Digitally Controlled Potentiometer
  • ISL95311 - Digitally Controlled Potentiometer
  • ISL95338 - Bidirectional Buck-Boost Voltage Regulator
  • ISL95522 - Hybrid Power Boost (HPB) and Narrow VDC (NVDC) Combo Battery Charger

Full PDF Text Transcription

Click to expand full text
ISL95710 NOTRREECCOOMMMMEENNDDEEDDRFEOPRLANCEEWMDEENST:IGNS ISL95310 Digitally Controlled Potentiometer (XDCP™), Terminal Voltage ±2.7V to ±5V, 128 Taps, Up/Down Interface DATASHEET FN8240 Rev 3.00 August 31, 2006 The Intersil ISL95710 is a digitally controlled potentiometer (XDCP). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by a Up/Down interface. The potentiometer is implemented by a resistor array composed of 127 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs.
Published: |