Datasheet4U Logo Datasheet4U.com

TS3001GB2A0 - Local Temperature Sensor

General Description

The TS3001GB2A0 digital temperature sensor with accuracy up to ±0.5°C was designed to target applications demanding highest level of temperature readout.

The digital temperature sensor comes with several user-programmable registers to provide maximum flexibility for temperature-sensing applications.

Key Features

  • Temperature Sensor.
  • Single Supply: 3.3V ± 5%.
  • Accurate timeout support - Meets strict SMBus spec of 25ms (min) 35ms (max).
  • Timeout supported in all Modes.
  • Active mode.
  • Shutdown mode.
  • Schmitt trigger and noise filtering on bus inputs.
  • 2-wire Serial Interface: 10-400 kHz I2C™ /SMBus™.
  • Package: TDFN-8 Temperature Sensor Features.
  • Temperature Converted to Digital Data.
  • Sampling Rate of 100ms (max).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TS3001GB2A0 Local Temperature Sensor IDT
TS30011 High Efficiency 1A/2A/3A Current-Mode Synchronous Buck DC/DC Converter Semtech
TS30012 High Efficiency 1A/2A/3A Current-Mode Synchronous Buck DC/DC Converter Semtech
TS30013 High Efficiency 1A/2A/3A Current-Mode Synchronous Buck DC/DC Converter Semtech
TS300 FAST SWITCHING PLASTIC RECTIFIER TRSYS

Other Datasheets by Renesas

Part Number Description
TS3000GB0A0 1.8V Local Temperature Sensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Local Temperature Sensor ® TS3001GB2A0 Data Sheet Description The TS3001GB2A0 digital temperature sensor with accuracy up to ±0.5°C was designed to target applications demanding highest level of temperature readout. The digital temperature sensor comes with several user-programmable registers to provide maximum flexibility for temperature-sensing applications. The registers allow specifying critical, upper, and lower temperature limits as well as hysteresis settings. Both the limits and hysteresis values are used for communicating temperature events from the chip to the system. This communication is done using Event pin, which has an open-drain configuration.