SE26T30B05E - Standard Capacitance Tvs Diode Array

SEMIWILL

General Description

The SE26T30B05E is designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events.

Each device will protect up to five lines.It is available with operating voltages of 5V .

Key Features

>Small package for use in portable electronics >Prot.

📥 Download Datasheet

SE26T30B05E standard capacitance tvs diode array by SEMIWILL - Datasheet Preview

Datasheet Details

Part number	SE26T30B05E
Manufacturer	SEMIWILL
File Size	638.96 KB
Description	Standard Capacitance Tvs Diode Array
Datasheet	SE26T30B05E Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
SE2600S	2.4 GHz WLAN Switch/LNA Front-End	SiGe
SE2600S	2.4GHz WLAN Switch/Low-Noise Amplifier Front-End	Skyworks Solutions
SE2601T	2.4GHz WLAN Switch/LNA Front-End	Skyworks
SE2605L	High Power (+26 dBm) 802.11n WLAN Power Amplifier	Skyworks
SE2611T	2.4GHz High Efficiency Wireless LAN/BT Front-End	Skyworks

Other Datasheets by SEMIWILL

Part Number	Description
SE26T30U3.3LD1	Transient Voltage Suppresser Array
SE23T20B24B	Standard Capacitance Tvs Diode Array

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

SE26T30B05E Standard Capacitance Tvs Diode Array DESCRIPTION The SE26T30B05E is designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events. Each device will protect up to five lines.It is available with operating voltages of 5V . It is unidirectional device and may be used on lines where the signal polarities are above ground. TVS diodes are solid-state devices designed specifically for transient suppression. They feature large crosssectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage and no device degradation.