Datasheet4U Logo Datasheet4U.com

BL6503 - Single Phase Energy Meter

Description

High accuracy, less than 0.1% error over a dynamic range of 500 : 1 Exactly measure the real power in the positive orientation and negative orientation, calculate the energy in the same orientation A PGA in the current channel allows using small value shunt and burden resistance The low frequency o

📥 Download Datasheet

Datasheet Details

Part number BL6503
Manufacturer SHANGHAI BELLING
File Size 406.63 KB
Description Single Phase Energy Meter
Datasheet download datasheet BL6503 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BL6503E Single Phase Energy Meter BELLING
BL652 enable OEMs to add single-mode Bluetooth Laird
BL652-SA enable OEMs to add single-mode Bluetooth Laird
BL652-SC enable OEMs to add single-mode Bluetooth Laird
BL6522 Phase multi-function high-precision Electronic power-metering BELLING

Other Datasheets by SHANGHAI BELLING

Part Number Description
BL6501 Single Phase Energy Meter IC
BL6501A Single Phase Energy Meter
BL6502 Integrated Oscillator Single Phase Current Sampling Energy Meter
BL6511 Three-phase Active Energy Meter
BL6512 With phase-phase meter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
BL6503 Single Phase Energy Meter IC FEATURES DESCRIPTION High accuracy, less than 0.1% error over a dynamic range of 500 : 1 Exactly measure the real power in the positive orientation and negative orientation, calculate the energy in the same orientation A PGA in the current channel allows using small value shunt and burden resistance The low frequency outputs F1 and F2 can directly drive electromechanical counters and two phase stepper motors and the high frequency output CF, supplies instantaneous real power, is intended for calibration and communications The logic outputs REVP can be used to indicate a potential orientation Low static power (typical value of 15mW). The technology of SLiM (Smart–Low–current– Management ) is used.
Published: |