EMC2112 Datasheet | SMSC

RPM-Based Linear Fan Controller with Hardware Thermal Shutdown PRODUCT Features General Description The EMC2112 is an SMBus, closed-loop, RPM-based fan driver with hardware (HW) thermal shutdown and reset controller. The EMC2112 offers a single High Side fan driver capable of sourcing up to 600m A from a 5V supply. The EMC2112 utilizes Beta pensation (an implementation of the BJT or transistor model for thermal diodes) and Resistance Error Correction (REC) to accurately monitor up to three (3) external temperature zones. These Features allow great accuracy for CPU substrate thermal diodes on multiple process geometries as well as with discrete diode-connected transistors. Both Beta pensation and REC can be disabled on the EMC2112 to maintain accuracy when monitoring AMD thermal diodes. The EMC2112 provides a stand-alone HW thermal shutdown block. The HW thermal shutdown logic can be configured for a few mon configurations based on the strapping level of the SHDN_SEL pin on the PCB. The HW thermal shutdown point can be set in 1°C increments by using a discrete resistor connected to the TRIP_SET pin. The EMC2112 also provides 5V supply ‘power good’ function with a threshold of 4.5V. This function is provided on the RESET pin. Applications - Notebook puters - Desktop puters - Embedded Applications Features - Closed-Loop RPM-Based Fan Controller - 1% accuracy with external clock input - 3% accuracy with internal clock - Internal clock can be used as a source - Aging fan detection - Integrated Linear Fan Driver - 600m A drive capability - HW Thermal Shutdown (SYS_SHDN) - 1°C incremental set points for thermal shutdown - Cannot be disabled by software - Provides Reset Function (RESET) On 5V Supply - Up to Three (3) Remote Thermal Zones - ±1°C accuracy (60°C to 100°C) - 0.125°C resolution - Designed to support 45nm, 65nm, and 90nm CPU Diodes using BJT and transistor model - Eliminates temperature offset due to series resistance from...