Datasheet4U Logo Datasheet4U.com

S25FL004D - Flash Memory

Description

The S25FL004D device is a 3.0 Volt (2.7 V to 3.6 V) single power supply Flash memory device.

S25FL004D consists of eight sectors, each with 512 Kb memory.

Data appears on SI input pin when inputting data into the memory and on the SO output pin when outputting data from the memory.

Features

  • Memory Protection.
  • W# pin works in conjunction with Status Register Bits to protect specified memory areas.
  • Status Register Block Protection bits (BP1, BP0) in status register configure parts of memory as readonly.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
S25FL032P 32-Mbit 3.0 V Flash Memory Cypress
S25FL064L 64-Mbit (8-Mbyte) 3.0V FL-L SPI Flash Memory Cypress
S25FL064L 64Mb (8MB) FL-L Flash Memory Infineon
S25FL064P 64-Mbit 3.0 V SPI Flash Memory Cypress
S25FL116K 3.0V SPI Flash Memory Cypress Semiconductor

Other Datasheets by Spansion (now Infineon)

Part Number Description
S25FL004A Flash Memory
S25FL004K 4-Mbit / 8-Mbit / 16-Mbit CMOS 3.0 Volt Flash Memory
S25FL001D (S25FL001D / S25FL002D) Flash Memory
S25FL002D (S25FL001D / S25FL002D) Flash Memory
S25FL008A Flash Memory

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com S25FL Family (Serial Peripheral Interface) S25FL004D 4 Megabit CMOS 3.0 Volt Flash Memory with 50 Mhz SPI Bus Interface ADVANCE INFORMATION Distinctive Characteristics ARCHITECTURAL ADVANTAGES „ Single power supply operation — Full voltage range: 2.7 to 3.6 V read and program operations Memory Architecture — Eight sectors with 512 Kb each Program — Page Program (up to 256 bytes) in 1.5 ms (typical) — Program cycles are on a page by page basis Erase — 0.5 s typical sector erase time — 4 s typical bulk erase time Endurance — 100,000 cycles per sector typical Data Retention — 20 years typical Device ID — Electronic signature Process Technology — Manufactured on 0.
Published: |