LCP12 Key Features
- Protection IC remended for ringing SLICs
- Wide firing voltage range: -120 V to +120 V
- Low gate triggering current: IG = 5 mA max
- Peak pulse current: IPP = 50 A (10/1000 µs)
- Holding current: IH = 150 mA min
- Part: LCP12
- Manufacturer: STMicroelectronics (official site)
- Size: 164.42 KB
Related STMicroelectronics Datasheets
| Part Number | Description |
|---|---|
| LCP150S | PROGRAMMABLE TRANSIENT VOLTAGE SUPPRESSOR FOR SLIC PROTECTION |
| LCP1511D | PROGRAMMABLE TRANSIENT VOLTAGE SUPPRESSOR FOR SLIC PROTECTION |
| LCP1521 | PROGRAMMABLE TRANSIENT VOLTAGE SUPPRESSOR FOR SLIC PROTECTION |
| LCP02-150B1 | PROTECTION IC FOR RINGING SLICS |
| LCP02-150M | PROGRAMMABLE TRANSIENT VOLTAGE SUPPRESSOR FOR RINGING SLICS |
LCP12 Description
The LCP12 has been developed to protect SLICs operating on both negative and positive battery supplies, as well as high voltage SLICs. It provides crowbar mode protection for both TIP and RING lines. The surge suppression is assumed for each wire by two thyristor structures, one dedicated.