Datasheet4U Logo Datasheet4U.com

M29F200BT - 2 Mbit 256Kb x8 or 128Kb x16 / Boot Block Single Supply Flash Memory

General Description

The M29F200B is a 2 Mbit (256Kb x8 or 128Kb x16) non-volatile memory that can be read, erased and reprogrammed.

These operations can be performed using a single 5V supply.

On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM.

Key Features

  • Lockout Voltage, VLKO. This prevents Bus Write operations from accidentally damaging the data during power up, power down and power surges. If the.

📥 Download Datasheet

Datasheet Details

Part number M29F200BT
Manufacturer STMicroelectronics
File Size 146.32 KB
Description 2 Mbit 256Kb x8 or 128Kb x16 / Boot Block Single Supply Flash Memory
Datasheet download datasheet M29F200BT Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
M29F200BT M29F200BB 2 Mbit (256Kb x8 or 128Kb x16, Boot Block) Single Supply Flash Memory PRELIMINARY DATA s SINGLE 5V±10% SUPPLY VOLTAGE for PROGRAM, ERASE and READ OPERATIONS ACCESS TIME: 45ns PROGRAMMING TIME – 8µs per Byte/Word typical 7 MEMORY BLOCKS – 1 Boot Block (Top or Bottom Location) – 2 Parameter and 4 Main Blocks 1 44 s s s s PROGRAM/ERASE CONTROLLER – Embedded Byte/Word Program algorithm – Embedded Multi-Block/Chip Erase algorithm – Status Register Polling and Toggle Bits – Ready/Busy Output Pin TSOP48 (N) 12 x 20mm SO44 (M) s ERASE SUSPEND and RESUME MODES – Read and Program another Block during Erase Suspend Figure 1.