Datasheet4U Logo Datasheet4U.com

M29F800AT - 8 Mbit 1Mb x8 or 512Kb x16 / Boot Block Single Supply Flash Memory

General Description

The M29F800A is an 8 Mbit (1Mb x8 or 512Kb x16) non-volatile memory that can be read, erased and reprogrammed.

These operations can be performed using a single 5V supply.

On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM.

Key Features

  • s from several memories to be connected to a single pull-up resistor. A Low will then indicate that one, or more, of the memories is busy. By.

📥 Download Datasheet

Datasheet Details

Part number M29F800AT
Manufacturer STMicroelectronics
File Size 142.66 KB
Description 8 Mbit 1Mb x8 or 512Kb x16 / Boot Block Single Supply Flash Memory
Datasheet download datasheet M29F800AT Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
M29F800FB (M29Fxx0Fx) Top / Bottom Boot Block 5 V Supply Flash Memory Numonyx
M29F800FT (M29Fxx0Fx) Top / Bottom Boot Block 5 V Supply Flash Memory Numonyx
M29F160FB Micron Parallel NOR Flash Embedded Memory Micron
M29F160FB (M29Fxx0Fx) Top / Bottom Boot Block 5 V Supply Flash Memory Numonyx
M29F160FT Micron Parallel NOR Flash Embedded Memory Micron

Other Datasheets by STMicroelectronics

Part Number Description
M29F800AB 8 Mbit 1Mb x8 or 512Kb x16 / Boot Block Single Supply Flash Memory
M29F800DB 8 Mbit (1Mb x8 or 512Kb x16 / Boot Block) 5V Supply Flash Memory
M29F800DT 8 Mbit (1Mb x8 or 512Kb x16 / Boot Block) 5V Supply Flash Memory
M29F002B 2 Mbit 256Kb x8 / Boot Block Single Supply Flash Memory
M29F002BB 2 Mbit 256Kb x8 / Boot Block Single Supply Flash Memory

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
M29F800AT M29F800AB 8 Mbit (1Mb x8 or 512Kb x16, Boot Block) Single Supply Flash Memory PRELIMINARY DATA s SINGLE 5V±10% SUPPLY VOLTAGE for PROGRAM, ERASE and READ OPERATIONS ACCESS TIME: 70ns PROGRAMMING TIME – 8µs per Byte/Word typical 19 MEMORY BLOCKS – 1 Boot Block (Top or Bottom Location) – 2 Parameter and 16 Main Blocks 1 44 s s s s PROGRAM/ERASE CONTROLLER – Embedded Byte/Word Program algorithm – Embedded Multi-Block/Chip Erase algorithm – Status Register Polling and Toggle Bits – Ready/Busy Output Pin TSOP48 (N) 12 x 20mm SO44 (M) s ERASE SUSPEND and RESUME MODES – Read and Program another Block during Erase Suspend Figure 1.