STGIB30M60TS-L
STGIB30M60TS-L is 600V short-circuit rugged IGBT manufactured by STMicroelectronics.
Features
- IPM 35 A, 600 V 3-phase IGBT inverter bridge including 2 control ICs for gate driving and freewheeling diodes
- 3.3 V, 5 V TTL/CMOS inputs with hysteresis
- Internal bootstrap diode
- Under-voltage lockout of gate drivers
- Smart shutdown function
- Short-circuit protection
- Shutdown input/fault output
- Separate open emitter outputs
- Built-in temperature sensor
- parator for fault protection
- Short-circuit rugged TFS IGBTs
- Very fast, soft recovery diodes
- 85 kΩ NTC UL 1434 CA 4 recognized
- Fully isolated package
- Isolation rating of 1600 Vrms/min
- UL recognition: UL 1557, file E81734
Applications
- 3-phase inverters for motor drives
- Washing machines
- Dryer
- Industrial fans
- Pumps
Description
This second series of SLLIMM (small low-loss intelligent molded module) provides a pact, high-performance AC motor drive in a simple, rugged design. It bines new ST proprietary control ICs (one LS and one HS driver) with an improved shortcircuit rugged trench gate field-stop (TFS) IGBT, making it ideal for motor drives operating up to 20 k Hz in hard-switching circuitries.
DS11296
- Rev 8
- September 2021 For further information contact your local STMicroelectronics sales office.
.st.
Internal schematic and pin description
Internal schematic and pin description
Figure 1. Internal schematic diagram and pin configuration
NC(1 ) Vboot U(2) Vboot V(3) Vboot W(4)
Hin U(5) Hin V(6) Hin W(7) Vcc H(8) GND(9)
Lin U(10) Lin V(11) Lin W(12)
Vcc L(13)
SD/OD(14) Cin(15)
GND(16) TSO(17)
H-side...
