STTA406 Datasheet | STMicroelectronics

TURES AND BENEFITS SPECIFIC TO FREEWHEEL MODE OPERATIONS: FREEWHEEL OR BOOSTER DIODE ULTRA-FAST, AND SOFT RECOVERY VERY LOW OVERALL POWER LOSSES IN BOTH THE DIODE AND THE PANION TRANSISTOR HIGH FREQUENCY OPERATIONS DESCRIPTION The TURBOSWITCH is a very high performance series of ultra-fast high voltage power diodes. TURBOSWITCH family, drastically cuts losses in both the diode and the associated switching IGBT or MOSFET in all freewheel mode operations and is particularly suitable and efficient in motor control freewheel applications and in booster diode applications in power factor control circuitries. Packaged in DO-201AD this 600V device is particularly intended for use on 240V domestic mains. DO-201AD ABSOLUTE RATINGS (limiting values) Symbol VRRM IP IFRM IFSM Tj Tstg Parameter Repetitive peak reverse voltage Peak forward current (1) Repetitive peak forward current Surge non repetitive forward current Tamb = 65°C δ = 0.5 tp = 5µs F = 5k Hz square tp = 10 ms sinusoidal VALUE 600 4 30 80 125 - 40 to 150 Unit V A A A °C °C Maximum operating junction temperature Storage temperature range (1) square waveform and on infinite heatsink TURBOSWITCH is a trademark of STMicroelectronics November 1999 - Ed: 3C 1/5 THERMAL DATA Symbol Rth(j-l) Rth(j-a) Parameter Junction to lead L lead = 10mm Junction to ambient on printed circuit L lead = 10mm Max. 20 75 Unit °C/W °C/W .. STATIC ELECTRICAL CHARACTERISTICS Test conditions IF = 4 A VR = 0.8 VRRM Ip < 3.IF(AV) Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C Tj = 125°C Typ. 1.25 0.75 Max. 1.75 1.5 50 2 1.15 85 Unit V V µA m A V mΩ Symbol VF - - IR - Vto Rd Test pulse : Parameter Forward voltage drop Reverse leakage current Threshold voltage Dynamic resistance - tp = 380 µs, δ < 2% - - tp = 5 ms, δ < 2% To evaluate the maximum conduction losses use the following equation : P = Vto x IF(AV) + Rd x IF2(RMS) DYNAMIC ELECTRICAL CHARACTERISTICS TURN-OFF SWITCHING Symbol trr Parameter Reverse recovery time Test conditions...