Datasheet4U Logo Datasheet4U.com

STUSB03E - USB Transceiver

Datasheet Summary

Description

The STUSB03E is a single chip transceiver that complies with the physical layer specifications of the Universal Serial Bus (USB) v2.0 standard.

It has an integrated 5V to 3.3V regulator which allows direct powering from the VBUS.

Features

  • Compliant to USB V2.0 for full-speed (12Mb/s) and low-speed (1.5Mbps) operation = ±14kV on D+, D.
  • lines; ±5kV on VBUS ESD Compliant to IEC-61000-4.2 (level 3) on D+, D- lines Separate I/O supply with operation down to 1.6V Integrated 3.3V output LDO Very low power consumption to meet USB ‘suspend’ current requirements Small QFN16 lead free package 3x3 mm2 No power supply sequencing requirements Software controlled re-enumeration Integrated D+ pull-up resistor for FS operation dete.

📥 Download Datasheet

Datasheet preview – STUSB03E

Datasheet Details

Part number STUSB03E
Manufacturer STMicroelectronics
File Size 474.30 KB
Description USB Transceiver
Datasheet download datasheet STUSB03E Datasheet
Additional preview pages of the STUSB03E datasheet.

📁 Similar Datasheet

  • STUS010 - SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR (EIC)
  • STUS011 - SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR (EIC)
  • STUS012 - SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR (EIC)
  • STUS013 - SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR (EIC)
  • STUS014 - SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR (EIC)
  • STUS015 - SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR (EIC)
  • STUS016 - SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR (EIC)
  • STUS018 - SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR (EIC)
  • STUS019 - SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR (EIC)
  • STUS020 - SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR (EIC)
Other Datasheets by STMicroelectronics

Full PDF Text Transcription

Click to expand full text
STUSB03E USB Transceiver General features ■ Compliant to USB V2.0 for full-speed (12Mb/s) and low-speed (1.5Mbps) operation = ±14kV on D+, D– lines; ±5kV on VBUS ESD Compliant to IEC-61000-4.2 (level 3) on D+, D- lines Separate I/O supply with operation down to 1.6V Integrated 3.3V output LDO Very low power consumption to meet USB ‘suspend’ current requirements Small QFN16 lead free package 3x3 mm2 No power supply sequencing requirements Software controlled re-enumeration Integrated D+ pull-up resistor for FS operation detect the presence of the VBUS voltage and features an internal D+ pull-up resistor implemented in accordance with the 27% resistor ECN. The STUSB03E also supports Sharing mode when VBUS is not present, which allows the D+/D– lines to be shared with other serial protocols.
Published: |