TSX393 Datasheet Micropower dual CMOS voltage comparators

Manufacturer: STMicroelectronics

TSX393 micropower dual cmos voltage comparators by STMicroelectronics - Datasheet Preview

Datasheet Details

Part number	TSX393
Manufacturer	STMicroelectronics
File Size	771.20 KB
Description	Micropower dual CMOS voltage comparators
Download	TSX393 Download (PDF)

General Description

The TSX393 is a micropower CMOS dual voltage comparator which exhibits a very low current consumption of 5 µA typical per comparator.

This device was designed as the improvement of the TS393: it shows a lower current consumption, a better input offset voltage, and an enhanced ESD tolerance.

The TSX393 is fully specified over a wide temperature range and is proposed in automotive grade for the SO8 package.

Overview

TSX393 Datasheet Micropower dual CMOS voltage comparators D SO8 (plastic micropackage) P TSSOP8 (thin shrink small outline package) S MiniSO8 (plastic package) DFN8 2x2 mm (plastic micropackage) Maturity status link.

Key Features

Low supply current: 5 µA typ. per comparator.
Wide single supply range 2.7 V to 16 V or dual supplies (±1.35 V to ±8 V).
Extremely low input bias current: 1 pA typ.
Input common-mode voltage range includes ground.
Open drain output.
High input impedance: 1012 Ω typ.
Fast response time: 2 µs typ. for 5 mV overdrive.
ESD tolerance: 4 kV HBM, 200 V MM.

More Datasheets from STMicroelectronics

Part Number	Description
TSX339	Micropower dual CMOS voltage comparators
TSX3702	Micropower dual CMOS voltage comparators
TSX3704	Micropower quad CMOS voltage comparators
TSX561	16V CMOS operational amplifiers
TSX561A	16V CMOS operational amplifiers
TSX562	16V CMOS operational amplifiers
TSX562A	16V CMOS operational amplifiers
TSX564	16V CMOS operational amplifiers
TSX564A	16V CMOS operational amplifiers
TSX582	200mA output current