VN330SP-E Datasheet | STMicroelectronics

Product status link VN330SP-E Product label Quad high-side smart power solid-state relay Features - Output current: 0.7 A per channel - Digital input clamped at 32 V minimum voltage - Shorted load and overtemperature protections - Built-in current limiter - Undervoltage shutdown - Open drain diagnostic output - Fast demagnetization of inductive loads - Conforms to IEC 61131-2 Applications - Programmable logic control - Industrial PC peripheral input/output - Numerical control machines Description The VN330SP-E is a monolithic device developed using VIPower technology, intended to drive four independent resistive or inductive loads with one side connected to ground. Active current limitation prevents dropping of the system power supply in case of shorted load. Built-in thermal shutdown protects the chip from overtemperature and short-circuit. The open drain diagnostic output indicates overtemperature conditions. DS4361 - Rev 5 - May 2022 For further information contact your local STMicroelectronics sales office. .st. Block diagram Figure 1. Block diagram Block diagram DS4361 - Rev 5 page 2/21 Pin connection Figure 2. Connection diagram (top view) Pin...