VNQ860SP-E Datasheet | STMicroelectronics

Features - VCC(AMR) = 41 V - RDS(on) ≤ 0.270 Ω @TJ = 25 o C (per channel) - Fast demagnetization of inductive loads ,VDEMAG(TYP) = VCC - 52V - Very low standby current - CMOS patible I/Os - Per channel process side op. current IOUT up to 0.35A - Undervoltage and overvoltage shutdown - Short circuit protection on output channels - Per-channel thermal shutdown protection and diagnostic - Protection against loss of ground Application - Industrial PC peripheral input/output - Numerical control machines - Drivers for all type of loads (resistive, capacitive, inductive) Description The VNQ860-E and VNQ860SP-E are monolithic devices realized in STMicroelectronics VIPower M0-3 technology, intended to drive any kind of load with one side connected to ground. Active current limitation bined with thermal shutdown and automatic restart protect the device against overload. The device automatically turns OFF in case of ground pin disconnection. This device is especially suitable for IEC 61131 pliant industrial applications. DS4107 - Rev 9 - October 2021 For further information contact your local STMicroelectronics sales office. .st. Block diagram VNQ860-E, VNQ860SP-E Block diagram Figure 1. Block diagram DS4107 - Rev 9 page 2/25 VNQ860-E, VNQ860SP-E Absolute maximum ratings Absolute maximum ratings Table 1. Absolute maximum ratings Symbol Parameter Value Unit DC supply...