VV5404 Datasheet | STMicroelectronics

DESCRIPTION VV5404 and VV6404 are highly integrated CMOS VLSI sensors which enables high standards of performance and image quality at a very cost-effective price point. The 356 x 292 monochrome device offers one of the simplest routes currently available to design-in of imaging applications, while the colour device is ideal for low cost PC camera applications. Both devices incorporate a prehensive range of on-board controls eliminating the need for additional support chips. Onchip A/D conversion provides 8 bit digital output and the device set up is fully automatic via the built-in automatic black level calibration algorithm. Exposure and gain settings are programmable and operation is controlled via a serial interface. This sensors offer variable frame rates of up to 30 frames per second and a 4 wire digital video bus. The digital interface also provides a tri-stateable data qualification clock and frame synchronisation signal. Hand-held products, in applications such as PDAs, bar code scanning or automatic meter reading, will benefit from the low power requirements and from the inbuilt sleep and power down modes. The price and performance standards introduced with the VV5404 and VV6404 enable use of an imaging solution where previously it may not have been practicable on cost grounds. FEATURES - - - - - - - - - - - CIF Format mono or colour pixel array Up to 30 frames per second operation On-chip 8 bit analogue to digital converter Low power consumption Up to 356 x 292 pixel image size Automatic exposure and gain control Serial interface control Programmable exposure and gain values Automatic black level calibration 4-wire digital video bus Evaluation kit available APPLICATIONS - - - PC Cameras Biometrics Inspection Systems SPECIFICATIONS Pixel resolution Array size Pixel size Min. illumination Exposure control Gain control Signal/Noise ratio 356 x 292 (CIF) 4.272mm x 3.212mm 12.0 µm x 11.0 µm 0.1 lux Automatic (to 25000:1) Automatic (to +20d B) 46d B 5.0v DC...