Datasheet4U Logo Datasheet4U.com

SPE0332 - 2-Line ESD Protection Array

General Description

The SPE0332 are designed by TVS bi-direction device that is to protect sensitive electronics from damage or latch-up due to ESD.

They are designed for use in applications where board space is at a premium.

Key Features

  • ESD protection of two lines.
  • Max. peak pulse power: Ppk = 350 W.
  • Low clamping voltage: VCL = 26 V.
  • Small SMD plastic package.
  • Ultra low leakage current: IRM < 90 nA.
  • ESD protection up to 23 kV.
  • IEC 61000-4-2, level 4 (ESD).
  • IEC 61000-4-5 (surge); IPP = 15 A PIN.

📥 Download Datasheet

Datasheet Details

Part number SPE0332
Manufacturer SYNC POWER
File Size 348.47 KB
Description 2-Line ESD Protection Array
Datasheet download datasheet SPE0332 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SPE02M50T-A Intelligent Power Module JILIN SINO
SPE02M50T-A Intelligent Power Module SPE
SPE02M50T-C Intelligent Power Module JILIN SINO
SPE04M50T-A Intelligent Power Module SPE
SPE04M60T-A IPM JILIN SINO

Other Datasheets by SYNC POWER

Part Number Description
SPE0311 Single-Line ESD Protection Array
SPE0504 4-Line ESD Protection Array
SPE0505 5-Line ESD Protection Array
SPE0506 5-Line ESD Protection Array
SPE0511 Single-Line ESD Protection Array

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SPE0332 2-Line ESD Protection Array DESCRIPTION The SPE0332 are designed by TVS bi-direction device that is to protect sensitive electronics from damage or latch-up due to ESD. They are designed for use in applications where board space is at a premium. SPE0332 will protect 2-line, and may be used on line where the signal polarities swing above and below ground. SPE0332 offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. SPE0332 may be used to meet the immunity requirements of IEC 61000-4-2, level 4. The small SOT-23 package makes them ideal for use in portable electronics such as cell phones, PDA’s, notebook computers, and digital cameras.