SCM3610C11 Datasheet | Sanken

Description The SCM3000C series are 3-phase brushless motor driver ICs in which output transistors, a pre-driver IC (MIC), bootstrap diodes with current-limiting resistors, and a temperature-sensing thermistor are highly integrated. These products can run on a 3-shunt current detection system and optimally control the inverter systems of medium-capacity motors that require universal input standards. Features - Built-in Thermistor - Built-in Bootstrap Diodes - CMOS-patible Input (3.3 V or 5 V) - Dead Time: 0.9 µs (min.) - Bare Lead Frame: Pb-free (Ro HS pliant) - Isolaton Voltage: 2000 V (for 1 min) - In Case of Malfunction, All Outputs Shut Down at Once - Fault Signal Output at Protection Activation - Protections: Undervoltage Lockout for Power Supply High-side (UVLO_VB): Auto-restart Low-side (UVLO_VCC): Auto-restart Overcurrent Protection (OCP): Auto-restart Simultaneous On-state Prevention: Auto-restart Typical Application Packages DIP22 Pin Pitch: 2 mm at Low Pin-to-Pin Voltage Difference 4 mm at High Pin-to-Pin Voltage Difference Mold Dimensions: 38 mm × 20.8 mm × 4 mm Leadform 2581 Leadform 2582 Selection Guide - IGBT + FRD (600 V) IO (A) 10 A 15 A Part Number SCM3610C11 SCM3615C11 Not to scale Feature Low noise Low noise Controller HIN1 HIN2 HIN3 LIN1 LIN2 LIN3 HIN1 11 HIN2 10 HIN3 9 LIN1 8 LIN2 7 LIN3 6 VCC 5 5V Fault FO...