SCM1242MF Datasheet | Sanken

600 V High Voltage 3-phase Motor Drivers SCM1200MF Series Data Sheet Description The SCM1200MF series are high voltage 3-phase motor drivers in which transistors, pre-drive circuits, and bootstrap circuits (diodes and resistors) are highly integrated. These products can run on a 3-shunt current detection system and optimally control the inverter systems of medium-capacity motors that require universal input standards. Features - Each Half-bridge Circuit Consists of a Pre-drive Circuit - In Case of Abnormal Operation, All Outputs Shut Down via Three FO Pins Connected Together - Built-in Bootstrap Diodes with Current Limiting Resistors (22 Ω) - CMOS-patible Input (3.3 V or 5 V) - Pb-free (Ro HS pliant) - Isolation Voltage: 2500 V (for 1 min), UL-recognized ponent (File No.: E118037) - Fault Signal Output at Protection Activation - Protections Include: Undervoltage Lockout for Power Supply High-side (UVLO_VB): Auto-restart Low-side (UVLO_VCC): Auto-restart Overcurrent Protection (OCP): Auto-restart Simultaneous On-state Prevention: Auto-restart Thermal Shutdown (TSD): Auto-restart Typical Application INT CFO LIN1 HIN1 U1 SCM1200MF Series FO1 1 2 OCP1 3 LIN1 4 1 5 HIN1 6 VCC1 MIC1 LIN2 HIN2 CBOOT1 7 VB1 8 HS1 FO2 9 10 OCP2 11 LIN2 12 2 13 HIN2 14...