LC75347E Datasheet | SANYO

Overview The LC75347E is a 6-channel 97-step electronic volume control system IC that provides a 2-channel input selector, bass and treble tone controls, external output ports, and a zero-cross volume switching function. - Built-in analog ground reference voltage generator circuit - All settings are controlled by serial data transmitted over a CCB interface. Package Dimensions unit: mm 3148A-QIP44M [LC75347E] 13.2 1.0 10.0 13.2 0.35 0.2 10.0 Functions - Volume: 0 to - 95 d B (in 1 d B steps) and - ∞, for a total of 97 positions. Each of the six input channels can be controlled independently. - Bass and treble: Each band can be controlled over a ±12 d B range in 2 d B steps. The bass control provides peaking characteristics and the treble control provides shelving characteristics. - Selector: 2-channel input selector - Zero cross: Provides independent zero-cross detection for each of the 6 channels and a timer overflow detection circuit. - External muting: Mute in/mute out function using zerocross detection and dedicated pins. - External output ports: Provides 4 n-channel transistor open-drain outputs. 44 1 (1.0) Features - Built-in buffer amplifiers reduce the number of external ponents to a minimum. - Fabricated in a silicon-gate CMOS process for minimal noise generation from internal switches. 2.8max (2.5) SANYO: QIP44M - CCB is a trademark of SANYO ELECTRIC CO., LTD. - CCB is SANYO’s original bus format and all the bus addresses are controlled by SANYO. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility...