LV5810M Datasheet | SANYO

.DataSheet.co.kr Ordering number : ENA1558 Bi-CMOS IC LV5810M Overview Step-down Switching Regulator LV5810M is a 1ch step-down switching regulator. 0.13Ω FET is incorporated on the upper side to achieve high-efficiency operation for large output current. Low-heat resistance and pact-package MFP8 (225mil) employed. Current mode control type, with superior load current response and easy phase pensation ON/OFF pin, allowing the standby mode with the current drain of 100μA or less Pulse-by-pulse over-current protection and overheat protection available for protection of load devices Soft start pin to be provided with a capacitance for soft start. Functions - 2A 1ch step-down switching regulator - Wide input dynamic range ( to 28V) - High efficiency (90% IOUT = 1A, VIN = 12V, VO = 5V) - Standby mode - Over-current protection - Thermal shutdown - Reference voltage: 0.8V - Fixed frequency: 370kHz - Soft start - pact package: MFP8 (225mil) Specifications Parameter Maximum Ratings at Ta = 25°C Symbol VIN max VBT max VSW max VBS-SW max Vfs max Pd max Tj max Topr Tstg Mount on a specified board - Conditions Ratings 32 37 VIN max 7 7 1.15 150 -20 to 80 -40 to 150 Unit V V V V V W °C °C °C Maximum input VIN voltage BOOT pin maximum voltage SW pin maximum voltage BOOT pin-SW pin maximum voltage FB, P, SS pin maximum voltage Allowable power dissipation Junction temperature Operating temperature Storage temperature - Specified board: 46.4mm × 31.8mm ×1.7mm, glass epoxy both side. Note: Plan the maximum voltage while including coil and surge voltages, so that the maximum voltage is not exceeded even for an instant. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the...