Datasheet4U Logo Datasheet4U.com

LV8092GQ - Bi-CMOS LSI Piezo Actuator Driver IC

Features

  • Actuators using piezoelectric elements can be driven simply by I2C communication.
  • The piezoelectric drive waveforms are set externally by serial input signals using the I2C interface.
  • The rising and falling timings are determined with clock count.
  • EN input that controls the startup/stop of the IC.
  • The time for which the actuator is driven is determined with the drive frequency setting based on I2C communication.
  • Provides a busy signal o.

📥 Download Datasheet

Datasheet Details

Part number LV8092GQ
Manufacturer Sanyo Semiconductors
File Size 138.10 KB
Description Bi-CMOS LSI Piezo Actuator Driver IC
Datasheet download datasheet LV8092GQ Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LV8094CT Piezo Actuator Driver IC ON Semiconductor
LV8011V Forward/Reverse Motor Driver Sanyo Semicon Device
LV8012T Forward/Reverse Motor Driver Sanyo Semicon Device
LV8012T Forward/Reverse Motor Driver ON Semiconductor
LV8013T Forward/Reverse Motor Driver ON Semiconductor

Other Datasheets by Sanyo Semiconductors

Part Number Description
LV8095LQ Bi-CMOS IC For VCMs Constant-current Driver IC
LV8098CS Constant-current Driver IC
LV8099CS Constant-current Driver IC
LV8013T Forward/Reverse Motor Driver
LV8018W 4ch PWM H-bridge Driver

Full PDF Text Transcription

Click to expand full text
Ordering number : ENA0844A www.DataSheet4U.com LV8092GQ Overview Bi-CMOS LSI Piezo Actuator Driver IC The LV8092GQ is a piezoelectric actuator driver IC. It internally generates drive waveforms and this makes it possible to control piezoelectric actuators with simple instructions. Features • Actuators using piezoelectric elements can be driven simply by I2C communication. • The piezoelectric drive waveforms are set externally by serial input signals using the I2C interface. • The rising and falling timings are determined with clock count. • EN input that controls the startup/stop of the IC. • The time for which the actuator is driven is determined with the drive frequency setting based on I2C communication.
Published: |