S4FL8.5A Datasheet | SeCoS Halbleitertechnologie GmbH

FEATURES Glass passivated chip Low leakage Uni polar unit Excellent clamping capability Very fast response time Ro HS pliant 400 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle):0.01 % MECHANICAL DATA Epoxy : UL94V-0 rate flame retardant Case : SOD-123FL Lead: Solderable per MIL-STD-750,method 2026 Polarity : Color band denotes cathode end Mounting Position : Any Weight : 0.0152 grams(approximate) SOD-123FL REF. Millimeter Min. Max. 2.4 3.10 1.55 2.00 0.80 1.55 3.3 3.90 REF. Millimeter Min. Max. 0.05 0.30 0.80 1.35 0.8 (Typ.) PACKAGE INFORMATION Package SOD-123FL 3K Leader Size 7 inch MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) Rating Symbol Value Peak power dissipation with a 10/1000µs waveform 1,3 Peak pulse current with a 10/1000µs waveform 1 See Next Table Peak forward surge current, 8.3 ms single half sine-wave unidirectional only 2 IFSM Maximum instantaneous forward voltage at 25 A for unidirectional only Operating junction and storage temperature range TJ, TSTG -55 ~ 150 Notes: 1. 2. 3. Non-repetitive current pulse per Fig.3 and derated above TA= 25°C per Fig.1. Measured on 8.3 ms single half sine-wave or equivalent square wave for unidirectional device only. S4FL5.0A~S4FL9.0A Peak Pulse Power Dissipation is 370W min, 400W typical @10/1000µs Unit W A A V °C http://.Se Co SGmb H./ 26-May-2017 Rev....