Datasheet4U Logo Datasheet4U.com

RClamp0521Z - 1-Line ESD protection

General Description

RailClamp® TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces.

They are designed to replace 0201 size multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and other portable electronics.

Key Features

  • High ESD withstand Voltage: +/-17kV (Contact) and +/- 25kV (Air) per IEC 61000-4-2.
  • Able to withstand over 1000 ESD strikes per IEC 61000-4-2 Level 4.
  • Ultra-small 0201 package.
  • Protects one high-speed data line.
  • Low reverse current:.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RClamp0521Z TVS DIODE Leiditech
RCLAMP0521P-N bi-directional TVS Diode DOWOSEMI
RCLAMP0522P TVS Diode Leiditech
RClamp0522PA Ultra Low Capacitance TVS Arrays Semtech Corporation
RCLAMP0524J TVS Array Semtech Corporation

Other Datasheets by SEMTECH

Part Number Description
RClamp0521PA 1-Line ESD Protection
RClamp0522P Ultra Low Capacitance TVS Arrays
RClamp0524PQ 4-Line Surge and ESD Protection
RClamp0524S Low Capacitance TVS Diode Array
RCLAMP0502B Ultra Low Capacitance TVS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PROTECTION PRODUCTS - Z-PakTM Description RailClamp® TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. They are designed to replace 0201 size multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and other portable electronics. This device offers desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. RClamp®0521Z has a typical capacitance of only 0.35pF. This allows it to be used on circuits operating in excess of 5GHz without appreciable signal attenuation. RClamp0521Z is in a 2-pin SLP0603P2X3 package. It measures 0.6 x 0.3 mm with a nominal height of only 0.25mm.