Datasheet4U Logo Datasheet4U.com

SRDA3.3-6 - Low Capacitance TVS Diode Array

Description

RailClamps are surge rated diode arrays designed to protect high speed data interfaces.

Features

  • ‹ Transient protection for high-speed data lines to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) IEC 61000-4-5 (Lightning) 24A (8/20µs) ‹ Array of surge rated diodes with internal TVS diode ‹ Protects six I/O lines and power supply line ‹ Low capacitance (.

📥 Download Datasheet

Datasheet Details

Part number SRDA3.3-6
Manufacturer SEMTECH
File Size 194.62 KB
Description Low Capacitance TVS Diode Array
Datasheet download datasheet SRDA3.3-6 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SRDA3.3-4 Low Capacitance TVS Diode Array Leiditech
SRDA3.3-4 ESD Protection Diode ON Semiconductor
SRDA3.3-4 Steering Diode/TVS Array Combo Bourns
SRDA3.3-4 Utralow Capacitance Transient Voltage Suppressors SEMITECH
SRDA3.3 TVS Diode Arrays Littelfuse

Other Datasheets by SEMTECH

Part Number Description
SRDA3.3-4 Low Capacitance TVS Diode Array
SRDA05-4 Low Capacitance TVS Diode Array
SRDA05-6 Low Capacitance TVS Diode Array
SRDA12-4 Low Capacitance TVS Diode Array
SRDA70-4 Low Capacitance TVS Diode Array

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PROTECTION PRODUCTS Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The SR series has been specifically designed to protect sensitive components which are connected to data and transmission lines from overvoltage caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. The unique design of the SRDA series devices incorporates surge rated, low capacitance steering diodes and a TVS diode in a single package. During transient conditions, the steering diodes direct the transient to either the positive side of the power supply line or to ground. The internal TVS diode prevents over-voltage on the power line, protecting any downstream components.
Published: |