Datasheet4U Logo Datasheet4U.com

EDGE4707B - Quad Channel Per-Pin Precision Measurement

General Description

The Edge4707B is a precision measurement unit designed for automatic test equipment and instrumentation.

Manufactured in a wide voltage CMOS process, it is a monolithic solution for a quad channel per pin PMU.

Key Features

  • a PMU that can force or measure voltage over a 15V I/O range, and supports 4 current ranges: 2 µA, 200 µA, 20 µA, and 2 mA. Each channel of the Edge4707B features an on-board window comparator that provides two bits of information: DUT too high and DUT too low. There is also a monitor function which provides a real time analog signal proportional to either the measured voltage or current. The Edge4707B is designed to be a low power, low cost, small footprint solution to allow high pin count test.

📥 Download Datasheet

Datasheet Details

Part number EDGE4707B
Manufacturer SEMTECH
File Size 226.02 KB
Description Quad Channel Per-Pin Precision Measurement
Datasheet download datasheet EDGE4707B Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
Edge118 Low Skew Clock Spreader Semtech
Edge142 Per Pin timing Deskew w 4x2 Cross Point Switch Semtech
Edge646 Pin Electronics Driver/ Window Comparator/ and Switch Matrix Semtech
Edge647 Pin Electronics Driver/ Window Comparator/ and Switch Matrix Semtech
Edge649 Octal Pin Electronics Driver/Receiver Semtech

Other Datasheets by SEMTECH

Part Number Description
EDGE4717D Per Pin Precision Measurement
EDGE211 Dual Pin Electronics Driver
EDGE629 1 GHz Timing Deskew and Quad Fanout Element
EDGE6420 Per-Pin Electronics Companion DAC
EDGE6435 (EDGE6435 / EDGE6436) Per-Pin Electronics Companion DAC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Edge4707B Quad Channel Per-Pin Precision Measurement Unit TEST AND MEASUREMENT PRODUCTS Description The Edge4707B is a precision measurement unit designed for automatic test equipment and instrumentation. Manufactured in a wide voltage CMOS process, it is a monolithic solution for a quad channel per pin PMU. Each channel of the Edge4707B features a PMU that can force or measure voltage over a 15V I/O range, and supports 4 current ranges: 2 µA, 200 µA, 20 µA, and 2 mA. Each channel of the Edge4707B features an on-board window comparator that provides two bits of information: DUT too high and DUT too low. There is also a monitor function which provides a real time analog signal proportional to either the measured voltage or current.