Datasheet4U Logo Datasheet4U.com

uClamp0541Z - 1-Line ESD Protection

General Description

μClamp® TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD.

It is designed to replace 0201 size multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and other portable electronics.

Key Features

  • large cross-sectional area junctions for conducting high transient currents. This device offers desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. μClamp®0541Z is in a 2-pin SLP0603P2X3 package. It measures 0.6 x 0.3 mm with a nominal height of only 0.25mm. Leads are finished with lead-free NiAu. Each device will protect one line operating at 5 volts. It gives the designer the flexibility to protect si.

📥 Download Datasheet

Other Datasheets by SEMTECH

Part Number Description
uClamp0544P 4-Line ESD Protection
UCLAMP0501H 1-Line ESD protection
UCLAMP0501P 1-Line ESD protection
UCLAMP0501T 1-Line ESD protection
UCLAMP0502P 2-Line ESD protection
UCLAMP0502T 2-Line ESD protection
UCLAMP0504A 4-Line ESD protection Array
UCLAMP0504T Low Profile Clamp 4-Line ESD Protection
UCLAMP0505A 5-Line ESD protection Array
UCLAMP0506A 5-Line ESD protection Array

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PROTECTION PRODUCTS - Z-PakTM Description μClamp® TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace 0201 size multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and other portable electronics. It features large cross-sectional area junctions for conducting high transient currents. This device offers desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. μClamp®0541Z is in a 2-pin SLP0603P2X3 package. It measures 0.6 x 0.3 mm with a nominal height of only 0.25mm. Leads are finished with lead-free NiAu. Each device will protect one line operating at 5 volts.