PC925L0NIP0F Datasheet | Sharp Corporation

PC925L0NSZ0F Series PC925L0NSZ0F Series High Speed, 2.5A Output, Gate Drive DIP 8 pin ∗OPIC Photocoupler - Description PC925L0NSZ0F Series contains a LED optically coupled to an OPIC chip. It is packaged in a 8 pin DIP, available in SMT gullwing lead form option. Peak output current is 2.5A, Input-output isolation voltage(rms) is 5k V and High speed response (t PHL, t PLH : MAX. 0.5μs). - Features 1. 8 pin DIP package 2. Double transfer mold package (Ideal for Flow Soldering) 3. Built-in direct drive circuit for MOSFET / IGBT drive (IO(peak) : 2.5A) 4. High speed response (t PHL, t PLH : MAX. 0.5μs) 5. Wide operating supply voltage range (VCC=15 to 30 V) 6. High noise immunity due to high instantaneous - mon mode rejection voltage (CMH : MIN. - 15k V/μs, CML : MIN. 15k V/μs) 7. Long creepage distance type (wide lead-form type only : MIN. 8mm) 8. High isolation voltage between input and output (Viso(rms) : 5k V) 9. Ro HS directive pliant - Agency approvals/pliance 1. Recognized by UL1577 (Double protection isolation), file No. E64380 (as model No. PC925L) 2. Package resin : UL flammability grade (94V-0) 3. pliant with Ro HS directive (2002/95/EC) 4. Content status of six substances specified in “ Management Methods for Control of Pollution Caused by Electronic Information Products Regulation ” (Chinese : 电子信息产品污染控制管理办法) (popular name : China Ro HS) ; refer to page 16 - Applications 1. IGBT/MOSFET gate drive for inverter control - "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-processing circuit integrated onto a single chip. Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP...