900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Silicon Microstructures

SM1111-EEN-S-165-000 Datasheet Preview

SM1111-EEN-S-165-000 Datasheet

Barometric Air Pressure Sensor

No Preview Available !

Analog
Barometric Air Pressure (BAP) Sensor
SM1111-EEN-S-165-000
Barometric Air Pressure (BAP) Sensor
FEATURES
Fully integrated and compensated pressure sensor
Measurement of absolute pressure: 60 - 165 kPa
Full thermal compensation to accuracy ±1.0 %FS
Ratiometric analog output with wide linear range
Two 16-bit ADCs for acquisition of pressure and temperature
inputs; pressure acquired at 20 kS/s
High Resolution Digital to analog converter (DAC)
Diagnosis of sensor, sensor supply wiring, and NVM check-sum
supervision at power-on
Supply voltage 5.0 V +/- 0.5V
Large operating temperature range -40 to + 85°C
Automotive qualified acc. to AEC-Q100
DESCRIPTION
The SM1111-EEN-S-165-000 is an absolute pressure sensor for
barometric air pressure measurement (BAP). It includes a piezo-
resistive pressure sensor die and a signal processing IC, which
performs amplification and thermal compensation of the pressure
sensor output to provide a linear, thermally stable signal output.
The sensor delivers calibrated output data at a ratiometric analog
voltage output. The pressure range 60 to 165 kPa is mapped
linearly to the nominal output range VAOUT,1 to VAOUT,2. Sensor
specific calibration data, configuration and product ID are stored
in an embedded NVM.
Silicon Microstructures, Inc. 2001-2019. All rights reserved
DOC # 40DS1112.00
+1-(408) 577-0100 | sales@si-micro.com I www.si-micro.com
Page 1




Silicon Microstructures

SM1111-EEN-S-165-000 Datasheet Preview

SM1111-EEN-S-165-000 Datasheet

Barometric Air Pressure Sensor

No Preview Available !

SM1111-EEN-S-165-000
www.si-micro.com
1. Absolute Maximum Ratings
Stresses beyond these absolute maximum ratings listed below may cause permanent damage to the device. These are stress ratings only;
operation of the device at these or any other conditions beyond those listed in the operational sections of this document is not implied.
Exposure to absolute maximum rated conditions for extended periods may affect device reliability. All voltages referred to VSS. Currents
flowing into terminals are positive, those drawn out of a terminal are negative.
No.
Description
1
Supply Voltage
2
Analog output Voltage
3
Analog output Current
4
Ambient Pressure
5
Junction Temperature
6
Storage Temperature
7
Power Dissipation
Condition
TA ≤ 125°C
Symbol
VDD
VAout
IAout
pA
TJ
TSTG
Pel
Minimum
-0.3
Maximum
6
-0.3
VDD+0.3
-15
+15
1
600
-40
130
-40
125
38
Units
V
V
mA
kPa
°C
°C
mW
2. ESD
No.
Description
Condition
1
ESD HBM Protection at all Pins
AEC Q100-002 (HBM) chip level test
2
ESD CDM Protection at all Pins
AEC Q100-011 (CDM) chip level test
3 ESD CDM Protection at Corner Pins AEC Q100-011 (CDM) chip level test
Symbol
VESD(HBM)
VESD(CDM)
VESD(CDM), C
Min. Typ. Max. Units
-2
2
kV
-500
500
V
-750
750
V
Silicon Microstructures, Inc. 2001-2019. All rights reserved
DOC # 40DS1112.00
+1-(408) 577-0100 | sales@si-micro.com I www.si-micro.com
Page 2



Part Number SM1111-EEN-S-165-000
Description Barometric Air Pressure Sensor
Maker Silicon Microstructures
Total Page 3 Pages
PDF Download

SM1111-EEN-S-165-000 Datasheet PDF





Similar Datasheet

1 SM1111-EEN-S-165-000 Barometric Air Pressure Sensor
Silicon Microstructures





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy