Datasheet4U Logo Datasheet4U.com

CXA1386P - 8-bit 75MSPS Flash A/D Converter

Description

The CXA1386P/K are 8-bit high-speed flash A/D converter ICs capable of digitizing analog signals at the maximum rate of 75MSPS.

The digital I/O levels of these A/D converters are compatible with the ECL 100K/10KH/10K.

Features

  • Differential linearity error: ±1/2LSB or less.
  • Integral linearity error: ±1/2LSB or less.
  • High-speed operation with maximum conversion rate of 75MSPS (Min. ).
  • Wide analog input bandwidth: 150MHz (Min. for full-scale input).
  • Low Power consumption: 580mW (Typ. ).
  • Single power supply:.
  • 5.2V.
  • Low input capacitance: 17pF (Typ. ).
  • Built-in integral linearity conpensation circuit.
  • Low error rate.
  • Operable at.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CXA1387S Video Signal Processor IC ETC
CXA1387S Aperture Compensation Sony
CXA1389AQ Cable Driver for Digital Transfer Sony
CXA1304 LED CREE
CXA1310 led Cree

Other Datasheets by Sony Semiconductor Solutions

Part Number Description
CXA1386K 8-bit 75MSPS Flash A/D Converter
CXA1314P VIDEO SWITCH COMPATIBLE WITH I2C BUS
CXA1315M 8-bit D/A Converter Supporting with I2C Bus
CXA1315P 8-bit D/A Converter Supporting with I2C Bus
CXA1330S DOLBY B/C TYPE NOISE REDUCTION SYSTEM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CXA1386P/K 8-bit 75MSPS Flash A/D Converter Description The CXA1386P/K are 8-bit high-speed flash A/D converter ICs capable of digitizing analog signals at the maximum rate of 75MSPS. The digital I/O levels of these A/D converters are compatible with the ECL 100K/10KH/10K. The CXA1386P/K is pin-compatible with the earlier models CXA1056P/K, CXA1016P/K, respectively. They can be replaced by the CXA1386P/K without any design changes, in most cases. Compared with the earlier models, these new models have been greatly improved in performance, by incorporating advanced process, new circuit design and carefully considered layout. Features • Differential linearity error: ±1/2LSB or less • Integral linearity error: ±1/2LSB or less • High-speed operation with maximum conversion rate of 75MSPS (Min.
Published: |