900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






TRACO

THM15-2423WI Datasheet Preview

THM15-2423WI Datasheet

DC/DC Converters

No Preview Available !

DC/DC Converter
THM 15WI Series, 15 Watt
Ultra wide 4:1 input voltage 15 W DC/DC
converter in a 1.6 x 1 ” plastic case
I/O isolation 5000 VACrms rated for
250 VACrms working voltage
Certification according to IEC/EN/ES
60601-1 3rd edition for 2xMOPP
Risk management process according to
ISO 14971 including risk management file
Acceptance criteria for electronic
CB
assemblies according to IPC-A-610 Level 3
Scheme
IEC 60601-1
ES 60601-1
Low leakage current < 2.5 µA
The THM 15WI series is a range of medical 15 Watt DC/DC converters in 1.6”
Extended operating temperature range x 1.0” plastic package and with wide 4:1 input voltage range. They provide a
–40°C to 85°C.
EMC compliance to IEC 60601-1-2 4th
edition and EN55032 class A
Operating up to 5000m altitude
5 year product warranty
reinforced isolation system for 5000 VACrms isolation and a very low leakage
current of less than 2.5 µA. The units are approved to IEC/EN/ES 60601-1 3rd
edition for 2 x MOPP (Means Of Patient Protection) and come along with an
ISO 14971 risk management file. Design and production conform to the quality
management system ISO 13485. With a high efficiency of up to 90% and highest
grade components the converters can reliably operate in an ambient tempera-
ture range of –40°C up to +85°C. They constitute a reliable solution not only for
medical equipment but also for demanding ranges of application such as trans-
portation, control & measurement or IGBT drivers.
Models
Order code*
Input voltage range
Output voltage
THM 15-2411WI
5.0 VDC
THM 15-2412WI
12 VDC
THM 15-2413WI
THM 15-2415WI
9.0 – 36 VDC
(24 VDC nominal)
15 VDC
24 VDC
THM 15-2421WI
±5 VDC
THM 15-2422WI
±12 VDC
THM 15-2423WI
±15 VDC
THM 15-4811WI
5.0 VDC
THM 15-4812WI
12 VDC
THM 15-4813WI
THM 15-4815WI
18 – 75 VDC
(48 VDC nominal)
15 VDC
24 VDC
THM 15-4821WI
±5 VDC
THM 15-4822WI
±12 VDC
THM 15-4823WI
±15 VDC
* suffix -A1 for remote control option with positive logic
suffix -A2 for remote control option with negative logic
Output current max.
3000 mA
1250 mA
1000 mA
625 mA
±1500 mA
±625 mA
±500 mA
3000 mA
1250 mA
1000 mA
625 mA
±1500 mA
±625 mA
±500 mA
Efficiency typ.
88.0 %
88.5 %
89.0 %
88.0 %
86.0 %
88.0 %
89.0 %
89.5 %
88.0 %
89.0 %
88.5 %
86.0 %
88.5 %
89.0 %
www.tracopower.com
Page 1 of 4




TRACO

THM15-2423WI Datasheet Preview

THM15-2423WI Datasheet

DC/DC Converters

No Preview Available !

THM 15WI Series, 15 Watt
Input Specifications
Input current no load
24 Vin models: 10 mA typ.
48 Vin models: 9 mA typ.
Surge voltage (3 sec. max.)
24 Vin models: 50 V max.
48 Vin models: 100 V max.
Start-up voltage
24 Vin models: 9 VDC (or lower)
48 Vin models: 18 VDC (or lower)
Startup time 60 ms max. (30 ms typ.)
Under voltage shut down (lock-out circuit)
24 Vin models: 7.8 - 8.6 VDC
48 Vin models: 15.8 - 17.4 VDC
Input filter Pi-type
Conducted noise
– Conducted & Radiated input suppression EN 55011 limits to IEC 60601-1-2 4th editon
EN55032 class A (internal filter)
EN55032 class B with external components
– Filter proposal www.tracopower.com/overview/thm15wi
EMC immunity
– Generic for Medical equipment IEC/EN 60601-1-2 4th edition
– ESD (electrostatic discharge) EN 61000-4-2, air ±15 kV, contact ±8 kV,
perf. criteria A
– Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A
– Fast transient / surge EN 61000-4-4, ±2 kV, perf. criteria A
(with external input capacitor / diode) EN 61000-4-5, ±2 kV perf. criteria A
24 Vin models: 2 pcs. Nippon chemi-con KY 220 µF / 100 V
1 pcs. TVS - SMDJ58A, 58V, 3000 W)
48 Vin models: 2 pcs. Nippon chemi-con KY 220 µF / 100 V
1 pcs. TVS - SMDJ120A, 120V, 3000 W)
– Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A
– Magnetic field immunity EN 61000-4-8
100 A/m, continuous, perf. criteria A
1000 A/m, 1 sec., perf. criteria A
External input fuse required
(recommended values, slow blow type)
24 Vin models: 3.15 A
48 Vin models: 1.6 A
Output Specifications
Voltage set accuracy ±1 % max.
Output voltage adjustment range
(single output models only)
5 & 12 VDC models: ±10 %
15 & 24 VDC models: –10 / +20 %
Regulation
– Input variation
– Load variation 0 – 100 %
– Cross regulation
single output: 0.2 % max.
dual output: 0.5 % max.
single output: 0.2 % max.
dual output: 1.0 % max.
dual output: 5.0 % max. (asymmetrical load 25/100 %)
Temperature coefficient ±0.02 %/K typ.
Minimum load not required
Ripple and noise
(20 MHz Bandwidth)
(±)5.0 VDC models: 50 mVp-p typ. with cap. 10 µF/25 V X7R MLCC
(±)12 VDC models: 75 mVp-p typ. with cap. 10 µF/25 V X7R MLCC
(±)15 VDC models: 75 mVp-p typ. with cap. 10 µF/25 V X7R MLCC
24 VDC models: 100 mVp-p typ. with cap. 4.7 µF/50 V X7R MLCC
Transient response
– Recovery time (25% load step change) 250 µs typ.
Over current limitation – Hiccup mode at 150 % typ. of Iout rated
at 185 % max. of Iout rated
Short-circuit protection Continuous, automatic recovery
www.tracopower.com
Page 2 of 4


Part Number THM15-2423WI
Description DC/DC Converters
Maker TRACO
Total Page 4 Pages
PDF Download

THM15-2423WI Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 THM15-2423WI DC/DC Converters
TRACO





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy