Datasheet4U Logo Datasheet4U.com

TS9009 - 80mA CMOS Low Dropout Voltage Regulator

General Description

The TS9009 series is combine high accuracy with very low power consumption (225uA at 20mA output), and very low dropout voltage (from typically 20mV at light loads to 300mV at 80mA).

The TS9009 series is designed for optimal performance with low-value, low cost ceramic capacitors.

Key Features

  • — — — — — — Output current up to 80mA Low power consumption Output voltage +/-2% Internal current and thermal limiting Reversed input polarity protection Zero Off-mode current Logic controlled shutdown Ordering Information Part No. TS9009xCX5 Operating Temp. (Ambient) -40 ~ +85 C o Package SOT-25 — — — — —.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TS9001 300mA CMOS Low Dropout Voltage Regulator Taiwan Semiconductor Company
TS9001 1.6V Nanopower Comparator Touchstone Semiconductor
TS9001 1.6V Nanopower Comparator Silicon Laboratories
TS9002 300mA CMOS LDO Taiwan Semiconductor Company
TS9010 150mA CMOS Low Dropout Voltage Regulator Taiwan Semiconductor Company

Other Datasheets by Taiwan Semiconductor

Part Number Description
TS9004 300mA CMOS LDO Adjustable Voltage
TS9005 600mA Low Noise CMOS LDO
TS9006 150mA Low Noise CMOS LDO
TS9007 300mA Low Noise CMOS LDO
TS9008 300mA High PSRR Low Noise CMOS LDO

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet.co.kr TS9009 80mA CMOS Low Dropout Voltage Regulator with Enable Pin assignment 1. Input 2. Ground 3. Enable 4. N/C 5. Output Low Power Consumption Low Drop Out Voltage 0.4V Enable Shutdown General Description The TS9009 series is combine high accuracy with very low power consumption (225uA at 20mA output), and very low dropout voltage (from typically 20mV at light loads to 300mV at 80mA). The TS9009 series is designed for optimal performance with low-value, low cost ceramic capacitors. In most applications only 0.47uF of output capacitance is required for stability, and specifically for battery power devices. The Chip Enable (CE) includes a CMOS or TTL compatible input allows the output to be turned off to prolong battery life.