MBRF20200CA Datasheet | Thinki Semiconductor

Features HMBR matured technology with high reliablity Low forward voltage drop High current capability Low reverse leakage current High surge current capability Application Automotive Inverters and Solar Inverters Plating Power Supply,SMPS,EPS and UPS Car Audio Amplifiers and Sound Device Systems Mechanical Data Case: Fully Isolated Molding TO-220F Full Plastic Pak Epoxy: UL 94V-0 rate flame retardant Terminals: Solderable per MIL-STD-202 method 208 Polarity: As marked on diode body Mounting position: Any Weight: 2.0 gram approximately .112(2.85) .100(2.55) ITO-220AB/TO-220F-3L .406(10.3) .381(9.7) .134(3.4) .118(3.0) .272(6.9) .248(6.3) Unit : inch (mm) .189(4.8) .165(4.2) .130(3.3) .114(2.9) .606(15.4) .583(14.8) .071(1.8) .055(1.4) .055(1.4) .039(1.0) .035(0.9) .011(0.3) .1 (2.55) .1 (2.55) .161(4.1)MAX .543(13.8) .512(13.0) .114(2.9) .098(2.5) .032(.8) MAX Case Case Case Case Positive Negative Doubler Series mon Cathode mon Anode Tandem Polarity Tandem Polarity Suffix "CT" Suffix "CA" Suffix "CD" Suffix "CS" MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25℃ unless otherwise noted) PARAMETER SYMBOL MBRF20100CA MBRF20150CA MBRF20200CA UNIT Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current(Total Device 2x10A) Peak repetitive forward current (Rated VR, Square wave, 20KHz) Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load Peak repetitive reverse surge current (Note 1) Maximum instantaneous forward voltage (Note 2) IF= 10 A, TJ=25℃ (Per Diode/Per Leg) IF= 10 A, TJ=125℃ IF= 20 A, TJ=25℃ IF= 20 A, TJ=125℃ Maximum reverse current @ rated VR TJ=25 ℃ TJ=125 ℃ Voltage rate of change (Rated VR) Typical thermal resistance Operating junction temperature range Storage temperature range Note 1: tp = 2.0 μs, 1.0KHz Note 2: Pulse test with PW=300μs, 1% duty cycle VRRM VRMS VDC IF(AV)...