TOSHIBA Field Effect Transistor Silicon N Channel MOS Type (L2−π−MOSV)
Chopper Regulator, DC−DC Converter and Motor Drive
z 4-V gate drive
z Low drain−source ON resistance
: RDS (ON) = 0.12 Ω (typ.)
z High forward transfer admittance
: |Yfs| = 5.0 S (typ.)
z Low leakage current
: IDSS = 100 μA (max) (VDS = 60 V)
z Enhancement mode
: Vth = 0.8 to 2.0 V (VDS = 10 V, ID = 1 mA)
Absolute Maximum Ratings (Ta = 25°C)
Drain−gate voltage (RGS = 20 kΩ)
DC (Note 1)
Pulse (Note 1)
Drain power dissipation
Single pulse avalanche energy
Repetitive avalanche energy (Note 3)
Storage temperature range
−55 to 150
Weight: 0.54 g (typ.)
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate
reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and
Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
Thermal resistance, channel to ambient
96.1 °C / W
Note 1: Ensure that the channel temperature does not exceed 150°C.
Note 2: VDD = 25 V, Tch = 25°C (initial), L = 7 mH, RG = 25 Ω, IAR = 5 A
Note 3: Repetitive rating: pulse width limited by maximum channel temperature
This transistor is an electrostatic-sensitive device.
Please handle with caution.