* Equipped with low frequency PWM mode and high frequency PWM mode for effectively reducing power consumption during standby conditions. The switch to standby mode is made when the FB voltage input to pin 4 (FB IN) exceeds the set voltage. The set voltage is determined by pin 3 (STB). OPP (Over Power
TA1319AP Datasheet (687.21 KB)
TA1319AP
687.21 KB
Switched mode power supply (smps) controller ic.
TA1319AP/AF Toshiba Bipolar Linear IC - Silicon Monolithic TA1319AP/AF TA1319AP Switched Mode Power Supply (SMPS) Controller IC The TA1319AP/AF is a.
📁 Related Datasheet
TA1319AF Switched Mode Power Supply (SMPS) Controller IC (Toshiba)
TA1310A SAW Filter 1586.360MHz (Golledge Electronics)
TA1310A SAW Filter 1588.655 MHz (TAI-SAW TECHNOLOGY)
TA1310AN NTSC Video / Chroma / Deflection and Distorition Compensation IC (Toshiba America Electronic)
TA1310ANG NTSC Video / Chroma / Deflection and Distorition Compensation IC (Toshiba America Electronic)
TA1310BN BUILT-IN VIDEO / CHROMA AND SYNC SIGNAL PROCESSOR AND DEFLECTION CORRECTION IC (Toshiba)
TA1310N DISTORTION COMPENSATION IC (Toshiba Semiconductor)
TA1316AN YCbCr/YPbPr Signal and Sync Processor (Toshiba Semiconductor)
TA1317AN Deflection Processor IC for TV (Toshiba Semiconductor)
TA1318AF Frequency Counter IC (Toshiba Semiconductor)
