TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
1 A Output Current, Variable Output Voltage and Low Dropout Voltage Regulator
with ON/OFF Control Switch
The TA48S00AF consists of small-surface mount type low-dropout
regulators with an output current of 1 A (maximum) and an
ON/OFF control switch. Control by an EN (ON/OFF) terminal
enables the regulator to be operated only when required (output ON).
The output voltage can be arbitrarily set by external resistance.
Therefore, the TA48S00AF can be used for a wide range of
applications. TA48S00AF is suitable for use in the power supply
circuits of AV, OA and other digital devices equipped with a stand-by
function, and of battery-operated portable data devices of various
types, where they will contribute to energy saving.
Weight: 0.36 g (Typ.)
• Built-in ON/OFF control function (active high)
• Maximum output current : 1 A
• Output voltage
:VOUT = 1.5 V to 9.0 V
• Reference voltage accuracy : VREF ± 2.5% (@Tj = 25°C)
• Low quiescent current
: 850 μA (Typ.) (@VOUT = 3.3 V ,I OUT = 0 A)
• Low standby current (output OFF mode): 0.5 μA (Typ.)
• Low-dropout voltage
:VD = 0.5 V (Max) (@VOUT = 3.3 V, I OUT = 500 mA)
• Protection function
:Overcurrent protection / overheating protection
• Package type
:Surface-mount 5-pin New PW-Mold
EN IN GND OUT ADJ
Note 1: A line under a Lot No. identifies the indication of
Part No. (or abbreviation code)
[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]
Please contact your TOSHIBA sales representative for
details as to environmental matters such as the RoHS
compatibility of Product.
The RoHS is the Directive 2011/65/EU of the European
Parliament and of the Council of 8 June 2011 on the
restriction of the use of certain hazardous substances in
electrical and electronic equipment.
Start of commercial production