TC62D776CFNAG Datasheet | Toshiba

Features - Supply voltage : VDD = 3.0 to 5.5 V - 16-output built-in - Output current setup range : IOUT = 1.5 to 90 m A - Constant current output accuracy (@ REXT = 1.2 kΩ, VOUT = 1.0 V, VDD = 3.3 V, 5.0 V) : S rank; between outputs ± 1.5 % (max) : S rank; between devices ± 1.5 % (max) : N rank; between outputs ± 2.5 % (max) : N rank; between devices ± 2.5 % (max) - Output voltage : VOUT = 17 V (max) - I/O interface : CMOS interfaces (Schmitt trigger input) - Data transfer frequency : f SCK = 25 MHz (max) - Operation temperature range : Topr = - 40 to 85 °C - 8-bit (256 steps) current correction function built-in. 1 bit (HC) by the MSB side: Selects the output current range. 7 bit by the LSB side: Output current is adjusted at 128 steps in the range of 11% to 45%. (In the case of HC=1) Output current is adjusted at 128 steps in the range of 50% to 200%. (In the case of HC=0) - Thermal shutdown function (TSD) built-in. - Output error detection function built-in. Auto-output error detection and manual-output error detection using mands Output open detection function (OOD) and output short detection function (OSD) built-in. - Power-on-reset function built-in. (When the power supply is turned on, internal data is reset) - Stand-by function built-in. (IDD = 1μA at standby mode) - Output delay function built-in. (Output switching noise is reduced) - Package : P-SSOP24-0409-0.64-001 For detailed part naming conventions, contact your local Toshiba sales representative or distributor. © 2014 TOSHIBA Corporation 2014-10-01 Block Diagram OUT0 OUT1...