Datasheet4U Logo Datasheet4U.com

TC74VCXH16374FT - Low-Voltage 16-Bit D-Type Flip-Flop

Key Features

  • Low-voltage operation: VCC = 1.8 to 3.6 V.
  • Bushold on data inputs eliminating the need for external pull-up/pull-down resistors.
  • High-speed operation: tpd = 3.0 ns (max) (VCC = 3.0 to 3.6 V) : tpd = 3.9 ns (max) (VCC = 2.3 to 2.7 V) : tpd = 6.0 ns (max) (VCC = 1.8 V).
  • Output current: IOH/IOL = ±24 mA (min) (VCC = 3.0 V) : IOH/IOL = ±18 mA (min) (VCC = 2.3 V) : IOH/IOL = ±6 mA (min) (VCC = 1.8 V).
  • Latch-up performance:.
  • 300 mA.
  • ESD pe.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TC74VCX2125FK Low-Voltage Quad Bus Buffer Toshiba Semiconductor
TC74VCX2573FK Low-Voltage Octal D-Type Latch Toshiba Semiconductor
TC74VCX2573FT Low-Voltage Octal D-Type Latch Toshiba Semiconductor
TC74VHC03F Quad 2-Input NAND Gate Toshiba Semiconductor
TC74VHC03FK Quad 2-Input NAND Gate Toshiba Semiconductor

Other Datasheets by Toshiba

Part Number Description
TC74VCXH16373FT Low-Voltage 16-Bit D-Type Latch
TC74VCXH162244FT Low-Voltage 16-Bit Bus Buffer
TC74VCXH162373FT Low-Voltage 16-Bit D-Type Latch
TC74VCXH162374FT Low-Voltage 16-Bit D-Type Flip-Flop
TC74VCXH16244FT Low-Voltage 16-Bit Bus Buffer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TC74VCXH16374FT TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74VCXH16374FT Low-Voltage 16-Bit D-Type Flip-Flop with Bushold The TC74VCXH16374FT is a high-performance CMOS 16-bit D-type flip-flop. Designed for use in 1.8-V, 2.5-V or 3.3-V systems, it achieves high-speed operation while maintaining the CMOS low power dissipation. This 16-bit D-type flip-flop is controlled by a clock input (CK) and an output enable input ( OE ) which are common to each byte. It can be used as two 8-bit flip-flops or one 16-bit flip-flop. When the OE input is high, the outputs are in a high-impedance state. The D data inputs include active bushold circuitry, eliminating the need for external pull-up resistors to hold unused or floating data inputs at a valid logic level.